Hygienic / Sanitary Process Temperature Probe Product Code: LDPH A cost effective temperature probe for Food, Dairy and Pharmaceutical processes • • • Consists of a 316L stainless steel probe with a hygienic tri-clover flange welded to the sheath, for easy and secure process connection with standard tri-clover clamps and gaskets Specified as either an RTD (PT100 or PT1000) or type T thermocouple. With an FDA Polypropylene head or 316L stainless steel head Specification: STEM MATERIAL STEM DIMENSIONS TRI-CLOVER PROCESS CONNECTION Sheath in 316 stainless steel. Diameter : Metric: 3.0mm to 15mm Imperial: ⅛”, 3/16“, ¼”, ⅜, ½” Reduced tip can be specified Immersion Length below tri-clover: 50mm min to as required Extension above tri-clover: Standard 50mm Imperial: 0.5-0.75”, 1-1.5”, 2.0”, 2.5” Metric: DN25, DN50 Vacuum flange or other flanges can be specified PT100 / PT1000 Single or duplex with 2, 3 or 4 wire connection. Triplex with 2 wire connection Tolerance: PT100: Class A, AA to BS EN 60751:2008 or 1/10 DIN PT1000:Class A Temperature Range: -50 to +250°C Single, duplex or triplex elements THERMOCOUPLE SENSOR Type: T to BS EN 60584-1:2013. Temperature Range: -50 to +250°C TERMINAL HEAD Screw cap, retention chain and M20 cable entry, environmental rating to IP67. In FDA approved Polypropylene or 316 stainless steel Complete with terminal block or transmitter OPTIONAL EXTRAS • • Datasheet : 063 Thermal Detection Limited Unit 6, Primrose Hill Industrial Estate Orde Wingate Way Stockton-on-Tees, England, TS19 0GA Transmitter for 4-20mA output to suit RTD or Thermocouple PR 5332 recommended for high accuracy PT100/PT1000 measurements for detectors with 4 wires Material certs for wetted parts UKAS calibration ADIF statement 0.8 RA surface finish on wetted parts Electropolishing for superior surface finish Fax : +44 (0) 1642 618307 Tel : +44 (0) 1642 602878 Email: sales@thermal-det

Hygienic / Sanitary Process Temperature Probe Product Enquiry Form Please download PDF and fill in the boxes. Use 'Additional Information' for non standard requests. Return form to [email protected] or fax to +44 1642 618307 Organisation: Country Section 1 - unit dimensions in mm, select options required Probe Immersion Length in mm Terminal Head Material FDA Polypropylene Stainless Steel Flange Size Probe Diameter (metric or Imperial) Section 2 - Sensor Configuration Sensor Number Single Duplex Triplex Thermocouple Only Hot Junction Termination Options Optional Extras 3.1 Material...