Pharmaceutical Process Temperature Probe Product Code: LDP A cost effective temperature probe for Food, Dairy and Pharmaceutical processes • • • • Consists of a plain stem probe with an FDA Polypropylene or 316 stainless steel terminal head Specified as either an RTD (PT100 or PT1000) or type T thermocouple. Plain stem or screw and flange process connection Can be specified with a 4-20mA transmitter Specification: STEM MATERIAL STEM DIMENSIONS Plain sheath in 316 stainless steel. Diameter : Metric: 3.0mm to 15mm Imperial: ⅛”, 3/16“, ¼”, ⅜, ½” Length: 50mm min to as required PT100 / PT1000 Single or duplex with 2, 3 or 4 wire connection. Triplex with 2 wire connection Tolerance: PT100: Class A, AA to BS EN 60751:2008 or 1/10 DIN PT1000:Class A Temperature Range: -50 to +250°C Single, duplex or triplex elements THERMOCOUPLE SENSOR Type: T to BS EN 60584-1:2013. Temperature Range: -50 to +250°C TERMINAL HEAD Screw cap, retention chain and M20 cable entry, environmental rating to IP67. In FDA approved Polypropylene or 316 stainless steel Complete with terminal block or transmitter PROCESS CONNECTIONS LDP - plain LDPS - screwed BSPT/BSPP, NPT, Metric. Welded or adjustable compression fitting LDPF - flanged, any size OPTIONAL EXTRAS • • Datasheet : 048 Thermal Detection Limited Unit 6, Primrose Hill Industrial Estate Orde Wingate Way Stockton-on-Tees, England, TS19 0GA Transmitter for 4-20mA output to suit RTD or Thermocouple PR 5332 recommended for high accuracy PT100/PT1000 measurements for detectors with 4 wires Material certs for wetted parts UKAS calibration ADIF statement 0.8 RA surface finish on wetted parts Electropolishing for superior surface finish

Pharmaceutical Process Probe Product Enquiry Form Please download PDF and fill in the boxes. Use 'Additional Information' for non standard requests. Return form to [email protected] or fax to +44 1642 618307 Organisation: Country Section 1 - unit dimensions in mm, select options required Probe Diameter Section 2 - Sensor Configuration Sensor Number Single Duplex Triplex Adjustable Compression Fitting Thermocouple Only Hot Junction FDA Polypropylene Stainless Steel Termination Options Optional Extras 3.1 Material Certs for wetted parts Ceramic Block ADIF Statement <0.8RA Surface Finish...