THERMAL Detection Bottle Cap with Integral Probe Clamp Description: When using liquid containers in a steriliser it is often difficult to ensure that the temperature probe is maintained centrally within the container and at the desired depth during the full sterilising cycle. The GL45 simplifies this by allowing the operator to precisely position the probe with the full confidence that it will remain in the selected position until manually removed. The probe clamp is permanently fitted to the cap and the cap can be supplied as standard or with a vent hole if required. Duran® is a registered trade mark of Schott Duran Produktions GmbH & Co. KG. Corning® is a registered trade mark of Corning Inc. Teflon® is a registered trade mark of the Dupont Corporation. Thermal Detection Limited Unit 6, Primrose Hill Industrial Estate Orde Wingate Way Stockton-on-Tees, England, TS19 0GA Email: [email protected] Web: www.thermal-detection.com

Bottle Cap with Integral Probe Clamp Validation Accessories: Steriprobe Autoclave Load Probe SL160 Angled Autoclave Probe GL45-1 Bottle Cap Gland for Thermocouple Thermocouple Entry Gland TCEG Clamps, Tri-clover Blanks, Gaskets Type T Thermocouple Wire Ampoule Holders Datasheet : 023 Thermal Detection Limited Unit 6, Primrose Hill Industrial Estate Orde Wingate Way Stockton-on-Tees, England, TS19 0GA Fax : +44 (0) 1642 618307 Tel : +44 (0) 1642 602878 Email: [email protected] Web: www.thermal-detection.com © Thermal Detection Ltd 2016