Ampoule Holder Product Code: Bl Description: Ampoule holders are designed to secure biological indicator ampoules in the correct position within a liquid or non-liquid load, during the sterilisation cycle. The clip mechanism ensures easy fitting and removal of the ampoule, and the rigid Teflon stem places the ampoule at the correct position within a container time and time again. A bore through the centre of the stem allows a thermocouple wire to be located alongside the ampoule. The holder can be supplied mated to a range of standard bottle caps or with a plain stem suitable for customers' existing silicone rubber bung. Thermal Detection Limited Unit 6, Primrose Hill Industrial Estate Orde Wingate Way Stockton-on-Tees, England, TS19 0GA Email: [email protected] Web: www.thermal-detection.com

Ampoule Holder Validation Accessories: Pre-cut Validation Thermocouples Validation Thermocouple Looms GL45 Bottle Cap Gland for Thermocouple Thermocouple Entry Gland TCEG Clamps, Tri-clover Blanks, Gaskets Type T thermocouple Wire Autoclave Load Probes Datasheet : 039 Thermal Detection Limited Unit 6, Primrose Hill Industrial Estate Orde Wingate Way Stockton-on-Tees, England, TS19 0GA Fax : +44 (0) 1642 618307 Tel : +44 (0) 1642 602878 Email: [email protected] Web: www.thermal-detection.com © Thermal Detection Ltd 2016