schol® tool kit working tools ► STEEL CORD BELT SPLICING & REPAIR ► TEXTILE PLY BELT SPLICING & REPAIR ► PULLEY LAGGING & RUBBER LINING

TES-SCL 01 TES-SCL 01/2 TES-SCL 02 TES-SCL 02/2 TES-SCL 03 TES-SCL 04 TES-SCL 05 TES-SCL 06 TES-SCL 07 TES-SCL 08 TES-SCL 08/2 TES-SCL 09 TES-SCL 10 TES-SCL 11

HAND TOOLS Measuring Tape is a linear measuring tool for belt splicing and pulley lagging works. Available lengths : 5m (TES-SCL 01) & 3m (TES-SCL 01/2) TES-SCL 01 Ball peen hammer is a drop forged striking tool for belt splicing & pulley lagging works. Available size: 500 gms TES-SCL 10 Rubber Mallet is used in belt splicing and pulley lagging works to remove entrapped air and for better fixity between the mating surfaces. Available size: 450 gms Steel rule is a linear measuring tool for belt splicing & pulley lagging works. Available lengths : 300mm (TES-SCL 02) and 150mm (TES-SCL 02/2) TES-SCL...

HAND TOOLS Off set knife is used to remove the excess uncured rubber filled at par with the belt surface. A leather protection cover is provided for additional safety. Flat Roller-II is used for consolidation of filler rubber in belt splices. Available size: 35mm (d) x 6mm (w) TES-SCL 28/3 Stitching roller is used for stitching the splicing chemical into small spaces during steel cord belt splicing. Available size : 48mm(d) x 4mm(w) Curved blade knife is used to remove excess rubber from steel cords. A leather protection cover is provided for additional safety. TES-SCL 29 TES-SCL 21 Quarter moon...

HAND TOOLS Concave wheel is used for buffing the steel cords, suitable for up to 12mm cord diameter. Gripping tong (Crocodile clamp) is used grip old rubber and plies during peeling for stripping. Durometer shore A is used to check the hardness of rubber. Hook Chook is used to lift upto 1500 kg and Pull upto 2500 kg. POWER TOOLS Angle grinder for light and medium duty application with a maximum disc size of 100mm used for buffing ply, rubber and metal surface. Angle grinder for heavy duty application with a maximum disc size of 180mm used for buffing ply, rubber and metal surface. TES-SCL 43/2 Hot...

THEJO ENGINEERING LIMITED 41, Cathedral Road, Chennai - 600 086, Tamilnadu, India. T: +91 44 42221900 |E: [email protected]|W: www.thejo-engg.com SCHOL TOOL KIT BROCHURE|RELEASE VERSION. 210803