
CONTINUOUS WEIGHING & FEEDING OF BULK MATERIALS s'*™“ THAYER Equipment for the OSB and MDF Industries
Open the catalog to page 1OSB Wood Strand Dryer Pre-feeder. CONVEYOR BELT SCALES SPECIFICALLY DESIGNED FOR LIGHT LOADING AND LIGHT DENSITY MATERIALS. To keep track of inventory and production (logs in compared with chips out, delivered tons per man-hour, etc.), Thayer Belt Scales weighs the chips as they travel along the belt conveyor. Thayer’s RF Series Belt Scales are made like no other Belt Scale. Using Thayer’s Force Measurement Suspension System, the conveyor idlers and belt are mass counterbalance so that the load transducer only sees the weight of the material. This allows the load cell size (rate pound loading)...
Open the catalog to page 2OSB Wood Strand Blending / Face, Intermediate and Core Weigh Belts Thayer Scale provides complete powdered resin handling and feeding systems for the OSB and MDF Industries. Blending is the process of adding resin to dried wood strands. It is important to synchronize wood flow with the resin and wax feeding equipment for optimum resin distribution. Phenol-formaldehyde resin is a spray dried powder that is fine, fluidizable, adhesive and temperature sensitive. It also must be contained to prevent fires and is considered a potential hazard to workers. Most all system design incorporate some type...
Open the catalog to page 3OSB Powdered Resin, Mechanical Conveying System B) Blower/Eductor conveying system where the material is discharged from the bulk bag unloader and into a surge hopper. The surge hopper discharges the material into a Thayer Loss-In-Weight feeder where it is accurately fed into an eductor. The eductor, using pressurized air, blows the material through the conveying line and directly into the blender. 1) This conveying system design has limitations on distance from the in-feed of the eductor to the discharge of the conveying line. 2) This system, since it uses either a Regenerative Blower or Positive-Displacement...
Open the catalog to page 4OSB Forming Line FP Mat Weigher OSB Forming Line FP Mat “Dual” Scale Weigher The THAYER Model FP is the low density belt scale of choice for accurately weighing a continuous, pre-pressed OSB/MDF mat stream. Custom manufactured to fit into an existing former line conveying system, the Model FP is specifically designed to control plant operating costs and product quality by providing an accurate and repeatable pounds per foot load output. This accurate measurement allows users to make informed decisions about forming system process adjustments, enabling them to maintain the finished product within...
Open the catalog to page 5THAYER SCALE-HYER INDUSTRIES, INC. MADE IN USA THAYER® and the THAYER logo are Registered Trademarks of Hyer Industries, Inc. © Hyer Industries, Inc. 2004. All rights reserved 91 Schoosett St., Pembroke, MA 02359 Ph: 781-826-8101 Fax: 781-826-7944 e-Mail: [email protected] WEB: www.ThayerScale.com
Open the catalog to page 65 Pages
4 Pages
3 Pages
4 Pages
5 Pages
7 Pages