
THAYER PROCESS MEASUREMENT AND CONTROL EQUIPMENT SERIES “SI” INSERTION WEIGH BELT MODULE Designed for rugged industrial use Easy to use, State of the Art Instrumentation Superior Accuracy and Design “FMSS” Force Measurement Techn
Open the catalog to page 1THAYER SCALE SI INSERTION WEIGH BELT MODULE WEIGHER The THAYER “SI” Insertion Weigh Belt Module has been designed to easily fit into an existing belt or vibratory conveyor line. A short support framework and a suspended 30” (inch) long “V-Guided” conveyor (12”, 18” and 24” wide) makes this the only practical weighing module for insertion into a short transition space between existing conveyors or equipment. Unique benefits result from suspending a short “V-Guided” conveyor from the model 15L Force Measurement Suspension System. Scale ”Over” Design Since load measurements are not affected by the...
Open the catalog to page 2“FMSS” SCALE TECHNOLOGY The SI Insertion Weigher uses Thayer Scale’s model 15L precision flexure plate suspension scale with FMSS technology. The scale provides for complete mass counterbalancing of the dead load of the conveyor permitting the load sensor to react only to the net material load. This unique system is not affected by dirt, shocks or vibration, and can withstand overloads in excess of 1,000 pounds without causing damage or affecting calibration. The highly advanced and extremely robust sensing technology is based on the marriage of the LVDT or strain gauge load cell, embedded temperature...
Open the catalog to page 3Model SI Scale Under with support stand and infeed & out feed chutes WEIGH LOOP!! THIS WIRING IS PART OF THE WEIGHING MECHANISM. WIRE OR CABLE RUN MUST BE FLEXIBLE AS TO NOT INTERFERE WITH WEIGHING. SYSTEM PERFORMANCE OR ACCURACY MAY BE SACRIFICED. 1 1/2" SHOWN IN CALIBRATION POSITION BELT REMOVAL SCALE COVER REMOVAL (SLIDE) TYPICAL MATERIAL FLOW PATH * FRONT SKIRT REMOVED TO SHOW TYPICAL MATERIAL FLOW PATH 12" 24"
Open the catalog to page 4PRODUCT FLOW BELT REMOVAL SHOWN IN CALIBRATION POSITION 16 13/16" MIN. SCALE COVER REMOVAL (SLIDE) Model SI Scale Under DUST PAN DRAIN TUBE (TYP.) 24" [609.6] MINIMUM REQ'D FOR BELT REMOVAL 6 1/8" [155.6] TOP OF BELT BELT REMOVAL DIRECTION CALIBRATION WEIGHT IN TYPICAL CALIBRATION POSITION
Open the catalog to page 5“SI” Weigher with vibratory prefeeder. Designed for free flowing materials. “SI” Weigher with Screw Prefeeder. Ideal for converting existing volumetric screw feeder into a highly accurate weigh feeder system. “SI” Insertion Weigher installed between two existing vibratory conveyors. “SI” Weigher with rotary valve pre-feeder. “SI” Weigher incorporated into a spice and chip coating system. Vibratory conveyor prefeeds the chips to the “SI” Weigher which feed the material to the coating drum. The weigh rate signal from the “SI” Weigher controls the output of the spice feeder. SPECIFICATION Capacity:...
Open the catalog to page 65 Pages
4 Pages
3 Pages
4 Pages
5 Pages
7 Pages