T95 PENDULUM-TYPE WEIGHING ASSEMBLY FOR HIGH ACCURACY APPLICATIONS capacities 2t -10t Image shows T95 load cell installed within LA95 painted mounting accessory The T95 weighing assembly comprises a stainless steel high accuracy load cell, complete with a tough mounting accessory in painted alloy steel (available as an option in stainless steel). The T95 is most suitable for high accuracy applications where movement or vibration is present, e.g. mixers, agitators, catalyst vessels, weighing platforms, axle weighers and vehicle weigh-in-motion (WIM) systems. The T95 load cell is also available with ATEX and IECEx approval certification for all gas and dust zones. Barriers are not required for use in gas zone 2 or dust zones 20, 21, 22. For applications in aggressive environments where stress corrosion or acid attack is a concern, a special Parylene coating can be specified as an option. Also available is an optional High Temperature variant, for continuous operation up to 150°C. ■ Stainless steel load sensor ■ Fully welded and hermetically sealed construction to IP68/IP69K ■ Tough and durable painted mounting accessory, with Stainless Steel option ■ 5 year warranty ■ Integral lift-off prevention ■ Load cell is always in tension ■ Ideal in mixer and vibrating applications ■ OIML C3 (3000 divisions) approval ■ Unique damping feature

technical specification... PARTIAL VIEW LOOKING DOWN ABOVE DIMENSION M øP (2 IN UPPER PLATE AND 2 IN LOWER PLATE) 4 SLOTS AS SHOWN IN EACH CASTING T95 Load Cell ATEX and IECEx Certification Cert. Safety Parameters Suitable for all dust and gas zones but requires safety barriers. Refer to ATEX certificate for further details. Suitable for Gas zone 2 only. No safety barriers are required. Refer to ATEX certificate for further details. Suitable for all Dust zones: 20, 21, 22. No safety barriers are required. Excitation voltage must be below 18V. Refer to ATEX certificate for further details. T95...