T64 Load cell Data sheet

Product catalog summary

Overview: The T64 tension load cell is designed for industrial weighing applications, with capacities ranging from 50kg to 2500kg. It is constructed from high-quality tool steel and is fully sealed to IP67 standards, ensuring durability and resistance to corrosion. The load cell can be used in tension, compression, or bi-directional applications, making it versatile for various industrial uses such as tank and vessel weighing, bag filling machines, concrete batching equipment, and conveyors.

Key Features:

High-quality steel load sensor with corrosion resistance.
Fully potted and sealed to IP67 for environmental protection.
Simple and low-cost installation with industry-standard configuration.
3-year warranty for reliability assurance.
Optional proof-tested eyebolts or rod end bearings available.

Technical Specifications:

Load Cell Capacities: 50, 100, 250, 500, 1000, 2500 kg.
Rated Output: 2 mV/V +/-0.1%.
Combined Error: < +/- 0.017%.
Non-repeatability: < +/- 0.015%.
Creep (30 minutes): < +/- 0.016%.
Temperature Effect on Zero Balance: < +/- 0.002%/˚C.
Temperature Effect on Span: < +/- 0.0012%/˚C.
Compensated Temperature Range: -10 to +40 ˚C.
Operating Temperature Range: -30 to +70 ˚C.
Safe Overload: 150%.
Ultimate Overload: 300%.
Zero Balance: < +/- 2%.
Input Resistance: 400 Ω +/- 20.
Output Resistance: 350 Ω +/- 3.
Insulation Resistance: > 5000 MΩ @ 100V.
Recommended Supply Voltage: 10 V, Maximum Supply Voltage: 15 V.
Cable Length: 5 m.

Dimensions:

For 50 - 100 kg: A = 63.5 mm, B = 15 mm, C = 50.8 mm, D = M8 x 1.25.
For 250 - 1000 kg: A = 76.2 mm, B = 19 mm, C = 50.8 mm, D = M12 x 1.25.
For 2500 kg: A = 108 mm, B = 25.4 mm, C = 76.2 mm, D = M20 x 1.5.

Electrical Connections: The load cell uses a 4-wire, 6.3mm diameter, screened polyurethane cable. The screen is not electrically connected to the load cell. The color coding for connections is: +ve input (RED), +ve output (GREEN), -ve input (BLUE), -ve output (YELLOW).

Additional Information: Thames Side Sensors Ltd reserves the right to incorporate technical modifications without prior notification, as part of their continuous product enhancement policy.

Catalog excerpts

T64 TENSION LOAD CELL FOR INDUSTRIAL WEIGHING capacities 50kg - 2500kg This folded bending beam load cell is manufactured from high quality tool steel, and fully sealed to IP67. Although normally utilised in tension, given the suitable adaptors and the appropriate application, it is possible to use the cell in compression or even in a bi-directional manner. The cell is typically used in tank and vessel weighing, bag filling machines, concrete batching equipment and conveyors. ■ High quality steel load sensor ■ Industry standard configuration ■ Fully potted & sealed to IP67 ■ Suitable for use in tension, compression or bi-directional manner ■ Simple low cost installation ■ Optional proof tested eyebolts or rod end bearings

Open the catalog to page 1

technical specification... T64 Load Cell Load cell specification Load Cell Capacities Combined Error Temperature Effect on Zero Balance Temperature Effect on Span Compensated Temperature Range Operating Temperature Range Rated Output Safe Overload Ultimate Overload Zero Balance Input Resistance - ve input BLUE - ve output YELLOW Recommended Supply Voltage Maximum Supply Voltage Environmental Protection Output Resistance Insulation Resistance Cable Length Nominal Shipping Weight *All percentages are related to Full Rated Load Electrical Connections Via 4 wire, 6.3mm diameter, screened polyurethane...

Open the catalog to page 2

T64 Load cell Data sheet

T64 Load cell Data sheet

Catalog excerpts

All Thames Side Sensors catalogs and technical brochures