T38 DOUBLE SHEAR BEAM LOAD CELL FOR HIGH TEMPERATURE APPLICATIONS capacities 40t - 200t This high accuracy double shear beam load cell is ideal for weighing in high temperature environments within Foundries, for example ladle turret and ladle ferry scales, scrap buckets, roller tables, tundish cars and silo/ hopper weighing systems. The T38 load cell features a combined error of just ±0.05%, a maximum service temperature of 150°C, a measuring element from nickel plated alloy steel and environmental protection to IP67. The connection to the 15-metre long PTFE cable is by a hermetically sealed connector, so that the cable can be changed or installed separately (if desired). Installation is simple and fast, through direct bolting to the connecting structure with no moving parts. Additionally, there is no need for any tie-bars or holding rods. Maintenance requirements are kept to a minimum with this optimised design. ■ Double shear beam load cell ■ Maximum service temperature 150°C ■ PTFE cable, 15 metres long ■ Nickel plated alloy steel measuring element ■ Hermetically sealed cable connector, for separate connection of cable (if desired) ■ Virtually unaffected by shock loads and inevitable side loads or moments ■ 6-wire (with sense) connection ■ Wide compensated temperature range ■ Superior repeatability and long-term stabil

technical specification... Dimensions Load cell specification Combined Error (constant temp.) Temperature Effect on Zero Balance Temperature Effect on Span Compensated Temperature Range Operating Temperature Range Load Cell Capacities Rated Output Minimum Dead Load (Emin) Safe Overload Ultimate Overload Zero Balance Input Resistance Output Resistance Maximum Supply Voltage Environmental Protection Insulation Resistance Recommended Supply Voltage Cable Length Maximum deflection (at capacity) 40t Nominal Shipping Weight + ve input GREEN + ve sense BLUE + ve output RED - ve sense YELLOW *With respect...