T34D DIGITAL COMPRESSION COLUMN LOAD CELL FOR WEIGHBRIDGES/TRUCK SCALES AND SILOS capacities 15t - 60t Upper and lower attachment plates to be supplied by customer Protective gaiter is removed for clarity This digital stainless steel self-centering rocker column load cell is fully welded and hermetically sealed, with protection to IP68/IP69K. It is an ideal solution for weighbridges / truck scales thanks to its approval to OIML C4 (4000 divisions) – available on special request – as well as lightning surge arrestors and a tough, durable Polyurethane cable. It has an open communications protocol, so it could be used with several brands of weight indicator. Digital load cells possess many advantages, compared with analogue load cells – such as much faster and simpler corner adjustment, as well as individual load cell fault diagnostics. For use in weighbridges/truck scales, a range of mounting cup accessory sets are available as optional items, in either stainless steel or nickel plated alloy steel, along with a rubber gaiter, sealing clip and a set of centering discs. The T34D digital load cell can also be used for the weighing of silos, vessel and tanks weighing when individual load cell fault diagnostics are required, for these applications the Silo Mount accessory is preferable. For applications in aggressive environments where stress corrosion or acid attack could be an issue, a special Parylene coating can be specified as an option. Also available as an option is a High Temperature version. ■ Open digital protocol ■ Fully welded and hermetically sealed to IP68/ IP69K ■ In-built surge arrestors for lightning protection ■ Simple and fast installation ■ Configuration and software can be updated using serial interface ■ Self-centering rocker column design with anti-rotation pin ■ Approval to OIML R60 C4 (4000 divisions) – on special request only ■ Mounting cup accessories available, as well as silo mount ■ Digital interface RS485 (full duplex) ■ 3 year warranty Advantages of the digital T34D load cell over the analogue T34 load cell: ■ Higher resolution (up to 1,000,000 steps from zero to full scale) Intelligent compensation for each individual load cell Easier, faster maintenance with continuous, individual self-diagnosis Direct PC connection via RS485 bus and RS232 converter, up to 1200 metres away Internal signal filtering Higher protection against EMC interference Simpler and faster corner adjustment Remote diagnostics via modem using

technical specification... T34D Load Cell Load Cell Capacities (E max) Dimensions Load cell specification Accuracy Class Combined Error Minimum load cell verification interval (vmin) = Capacity / Y Creep (30 minutes) Temperature Effect on Zero Balance Temperature Effect on Span Compensated Temperature Range Operating Temperature Range Safe Overload Ultimate Overload Zero Balance RS485 Serial Interface Output Max. transmission cable length Insulation Resistance Recommended Supply Voltage Protection Class Nominal Shipping Weight Mounting Accessories * User programmable ** OIML C4 approval is available...