T30 Load cell Data sheet

Product catalog summary

Overview: The T30 High Capacity Load Cell Assembly is designed for silo and tank weighing, with capacities ranging from 100 to 600 tonnes. It is particularly suitable for industries such as cement, waste processing, and minerals.

Key Features:

Self-aligning design for easy installation.
High specification Polyurethane cable with IP67 sealing.
Wide operating temperature range from -40 to +80°C.
High accuracy with compensation for thermal expansion and contraction.
Integral lift-off prevention up to 20% of load cell capacity.
5-year warranty.

Technical Specifications:

Load Cell Capacities: 100, 200, 300, 400, 600 tonnes.
Rated Output: 2.0 ± 0.25% mV/V.
Combined error: < ±0.01%.
Non-repeatability: < ±0.03%.
Creep (30 minutes): < ±0.05%.
Temperature Effect on Zero Balance: < ±0.003%/°C.
Temperature Effect on Span: < ±0.005%/°C.
Safe Overload: 150%.
Ultimate Overload: 300%.
Input Resistance: 750 ± 30 Ω.
Output Resistance: 705 ± 5 Ω.
Insulation Resistance: > 500 MΩ @100v DC.
Recommended Supply Voltage: 5 - 15 V.
Maximum Supply Voltage: 15 V.
Cable Length: 15 m.

Mounting Assembly Specifications:

Maximum Lift-off Resistance: 20,000 kg for 100t, 40,000 kg for 200t, 120,000 kg for 300-600t.
Maximum Side Load Resistance: 15,000 kg for 100t, 30,000 kg for 200t, 90,000 kg for 300-600t.
Maximum Angular Misalignment: ±4°.

Installation Note: After installation, remove the transit screws from the upper part of the load cell to maintain warranty validity.

Contact Information: Thames Side Sensors Ltd, Reading, Berkshire, UK. Tel: +44 (0) 118 941 1387, Email: [email protected]

Catalog excerpts

T30 HIGH CAPACITY LOAD CELL ASSEMBLY FOR SILO AND TANK WEIGHING capacities 100t - 600t A high accuracy load cell housed in an integral mounting assembly, which is ideal for general weighing of large tanks, silos and vessels – particularly in the cement, waste processing and mineral industries. The design ensures optimum performance and eliminates many traditional problems encountered during the installation of high capacity load cells. The T30 load cell and mounting assembly are supplied as an integrated unit, locked for transport and ready to install on delivery. The special mounting assembly design readily accommodates structural misalignment and horizontal movement caused by thermal expansion and contraction of the silo, tank or vessel. Lift-off protection is built into the design and can withstand forces of up to 20% of the load cell capacity, making the T30 ideal for installation in exposed locations subject to strong winds. ■ Self-aligning design ■ Tough epoxy painted mounting assembly ■ Simple, low-cost installation ■ High accuracy design ■ High specification Polyurethane cable ■ Compensation for thermal expansion and contraction ■ Construction and cable connector sealed to IP67 ■ Integral lift-off prevention (up to 20%) ■ Wide operating temperature range ■ 5 year warranty

Open the catalog to page 1

technical specification... AFTER INSTALLATION, COMPLETELY REMOVE TRANSIT SCREWS (QTY. 4) FROM UPPER PART OF LOAD CELL, OTHERWISE WARRANTY WILL BE INVALIDATED. Load Cell Capacities Load cell specification Combined error Rated Output Temperature Effect on Zero Balance Temperature Effect on Span Compensated Temperature Range Operating Temperature Range Ultimate Overload Zero Balance Input Resistance Output Resistance Insulation Resistance Recommended Supply Voltage Safe Overload Maximum Supply Voltage Cable Length Cable Material Nominal Shipping Weight Protection Class *All percentages are related...

Open the catalog to page 2

T30 Load cell Data sheet

T30 Load cell Data sheet

Catalog excerpts

All Thames Side Sensors catalogs and technical brochures