T2 Load Cell Datasheet

Product catalog summary

Overview: The T2 is a double bending beam single point load cell made from high-quality aluminium alloy, designed for high accuracy weight measurement, especially with off-centre loads. It is potted and sealed to IP66 standards, making it suitable for various applications such as single point platforms, small buckets, hoppers, bagging, dosing machines, and filling scales.

Key Features:

High-quality aluminium alloy construction.
High accuracy with off-centre loads.
Potted and silicone sealed to IP66.
Wide operating temperature range.
3000 divisions performance.
2-year warranty.
Maximum platform size of 350 x 350mm.

Technical Specifications:

Capacities range from 5kg to 50kg.
Rated Output: 2 mV/V ± 10%.
Combined Error: < ± 0.017% Sn.
Non-repeatability: < ± 0.01% Sn.
Creep (30 minutes): < ± 0.016% Sn.
Temperature Effect on Zero Balance: < ± 0.002% Sn/˚C.
Temperature Effect on Span: < ± 0.0012% Sn/˚C.
Compensated Temperature Range: -10 to +40 ˚C.
Operating Temperature Range: -20 to +70 ˚C.
Safe Overload: 150% Emax.
Ultimate Overload: 200% Emax.
Zero Balance: < ± 2% Sn.
Input Resistance: 400 Ω ± 20.
Output Resistance: 350 Ω ± 3.
Insulation Resistance: > 5000 MΩ @ 100V.
Recommended Supply Voltage: 5-15 V.
Maximum Supply Voltage: 15 V.
Environmental Protection: IP66.
Maximum deflection at Emax: 0.3 - 0.5 mm.
Cable Length: 3 m, PVC material.
Nominal Shipping Weight: 0.5 kg.

Electrical Connections: The load cell connects via a 4-core, 4mm diameter, screened PVC cable. The screen is not electrically connected to the load cell.

Additional Information: Thames Side Sensors Ltd reserves the right to incorporate technical modifications without prior notification. The load limit applies to central loads only, with a lower limit for off-centre loads.

Catalog excerpts

T2 ALUMINIUM SINGLE POINT LOAD CELL capacities 5kg - 50kg This double bending beam single point load cell is manufactured from high quality aluminium alloy. Its design allows for high accuracy weight measurement with off-centre loads. It’s potted and sealed to IP66. Typical applications include: single point platforms up to 350 x 350mm in size, small buckets and hoppers supported by a single load cell, small bagging & dosing machines as well as filling scales. ■ High quality aluminium alloy load sensor ■ High accuracy with off-centre loads ■ Potted and silicone sealed to IP66 ■ 350 x 350mm maximum platform size (load cell placed centrally under the platform) ■ Wide operating temperature range

Open the catalog to page 1

technical specification... T2 Load Cell Load Cell Capacity (Emax) Rated Output (Sn) Load cell specification Combined Error Minimum load cell interval (vmin) - ve Excitation BLACK - ve Signal WHITE SCREEN Temperature Effect on Zero Balance Temperature Effect on Span Compensated Temperature Range Operating Temperature Range Safe Overload Ultimate Overload Zero Balance Input Resistance Output Resistance Insulation Resistance Recommended Supply Voltage Environmental Protection Cable Length Cable Material Nominal Shipping Weight Electrical Connections Via 4 core, 4mm diameter, screened PVC cable....

Open the catalog to page 2

T2 Load Cell Datasheet

T2 Load Cell Datasheet

Catalog excerpts

All Thames Side Sensors catalogs and technical brochures