Catalogs >
Thames Side Sensors >
T12A Load cell Data sheet

T12A Load cell Data sheet
2Pages

Catalog excerpts

T12A SINGLE POINT LOAD CELL capacities 50kg - 400kg The T12A double bending beam single point load cell is ideal for high accuracy weight measurement with offcentre loads when the environment does not require stainless steel. Its nickel plated alloy steel construction, with silicone sealing to IP66, provides a cost-effective solution that is approved to 4000 divisions OIML R60 Class C. As standard, the T12A is supplied with a screened polyurethane cable; this provides a higher level of resistance to cuts and damage than a PVC cable. Typical applications include weighing platforms with dimensions up to 800mm x 800mm; bagging, filling and dosing machines; medical scales; checkweighers; small bucket and hopper systems. ■ Nickel plated alloy steel load sensor ■ High accuracy with off-centre loads ■ 600x600 mm or 800x800 mm platform size (with load cell placed centrally under the platform) ■ OIML R60 Class C 4000 divisions (C4) ■ Cost-effective solution ■ 5 year warranty ■ High durability Polyurethane cable provides higher resistance to chemicals than PVC

Open the catalog to page 1

I E Qty. 2 spacer plates supplied with load cell, as shown above Load Cell Capacities Accuracy Class Combined Error Temperature Effect on Zero Balance Temperature Effect on Span Compensated Temperature Range Operating Temperature Range Safe Overload Ultimate Overload Rated Output Minimum Dead Load Zero Balance Maximum Deflection at Nominal Capacity Input Resistance Output Resistance Maximum Supply Voltage Environmental Protection Insulation Resistance Recommended Supply Voltage Cable Length Maximum Platform Size + Nominal Shipping Weight * With respect to rated output ** Only applies to...

Open the catalog to page 2

T12A Load cell Data sheet 2Pages

Catalog excerpts

All Thames Side Sensors catalogs and technical brochures

T12A Load cell Data sheet
2Pages