*mydirectindustry

T11 Load Cell

Product catalog summary

Overview: The T11 Single Point Load Cell is designed for high accuracy weight measurement, particularly with off-centre loads. It is constructed from nickel-plated alloy steel and is potted and sealed to IP66 standards, ensuring durability and protection against environmental factors.

Specifications:

Capacities range from 15kg to 150kg.
Rated output is 2 mV/V with a tolerance of +/- 10%.
Accuracy is classified as 3000 divisions OIML R60 Class C.
Combined error is less than +/- 0.017%.
Non-repeatability is less than +/- 0.01%.
Creep over 30 minutes is less than +/- 0.016%.
Temperature effects on zero balance and span are minimal.
Compensated temperature range is -10 to +40°C, with an operating range of -20 to +70°C.
Safe overload capacity is 150%, with an ultimate overload of 200% for central loads.
Environmental protection is rated at IP66.

Applications: Suitable for single point platforms up to 500x500mm, small buckets, hoppers, bagging and dosing machines, filling scales, and checkweighers.

Electrical Connections: Utilizes a 4-wire, 5.7mm diameter screened polyurethane cable. The screen is not electrically connected to the load cell.

Dimensions: Vary based on capacity range, with specific measurements provided for ranges 15-30kg and 50-150kg.

Additional Information: The product comes with a 5-year warranty and features a high durability PU cable. Thames Side Sensors Ltd reserves the right to make technical modifications without prior notice.

Catalog excerpts

T11 SINGLE POINT LOAD CELL capacities 15kg - 150kg This double bending beam single point load cell is manufactured from high quality alloy steel and nickel plated. Its design allows for high accuracy weigh measurement with off-centre loads and it’s potted and sealed to IP66. Typical applications include: single point platforms up to 500x500mm in size, small buckets and hoppers supported by a single load cell, small bagging and dosing machines, filling scales and checkweighers. ■ Nickel plated alloy steel load sensor ■ Potted and silicone sealed to IP66 ■ 500 x 500mm max. platform size (with load cell placed centrally under platform) ■ 3000 divisions OIML R60 Class C ■ High durability PU cable

Open the catalog to page 1

technical specification... Dimensions Load cell specification Accuracy Class Combined Error Temperature Effect on Zero Balance Temperature Effect on Span Load Cell Capacities Rated Output Operating Temperature Range Compensated Temperature Range Safe Overload Maximum Deflection at Nominal Capacity Input Resistance Ultimate Overload Zero Balance Output Resistance Insulation Resistance Recommended Supply Voltage Maximum Supply Voltage Environmental Protection - ve input BLUE - ve output YELLOW Nominal Shipping Weight (300 - 2000kg) Nominal Shipping Weight (3000 - 5000kg) Cable length *With respect...

Open the catalog to page 2

T11 Load Cell

T11 Load Cell

Catalog excerpts

All Thames Side Sensors catalogs and technical brochures