PBM-16
12Pages

{{requestButtons}}

Catalog excerpts

PBM-16 - 1

Producing weld preparations is done in seconds PBM PIPE END PREPARATION MACHINES for • heat exchanger manufacturing • offshore constructions • apparatus manufacture • equipment constructions • shipbuilding • machine construction • pipeline construction

Open the catalog to page 1
PBM-16 - 2

History of Th. Wortelboer BV Th. Wortelboer BV was established in 1946 as a technical trading company. The delivery programme developed more and more in the direction of pipe constructions from 1965. Since then Th. Wortelboer BV has specialised in supplying and later manufacturing of the required tools and machines for piping constructions and pipe end preparation. Quality, a long lifetime, ease of operation and naturally the wishes of the customer are the most important design requirements. Machines that are designed by Th. Wortelboer BV are characterised by their enormous operational...

Open the catalog to page 2
PBM-16 - 3

Machining examples for end preparation/beveling V-joint welding edge (various angles bevelling and facing possible simultaneously) V-joint welding edge with internal bevelling (various angles bevelling and facing possible simultaneously) “Compound” welding edge with two different angles (various combinations of bevelling angles possible) Internal taper (various taper angles and facing possible simultaneously) External taper (various taper angles and facing possible simultaneously) Internal straight chamber (facing possible simultaneously) External straight chamber (facing possible...

Open the catalog to page 3
PBM-16 - 4

PBM-4, PBM-6-SCR, PBM-6, PBM-8 and PBM-16 The basis of the PBM series is formed by the new PBM-4 with clamping range from 1/2” to 4” (20 mm 116 mm outside diameter). The number in the title of the machine refers to the maximum clamping range in inches for that particular machine. For example, the PBM-16 has a clamping range up to 16” (435 mm). A complete overview with specifications of all PBM machines can be found in the middle of this brochure. PBM-8 MAKING WELD PREPARATIONS IS A MATTER OF SECONDS The performance determines the choice of a machine. Th. Wortelboer BV supplies the fastest...

Open the catalog to page 4
PBM-16 - 5

PBM-30 The PBM-30 pipe end preparation machine is (at present) the largest in the range of PBM machines. Because of the size of the machine and because it is made in a very economical way it is especially suited for pipes up to 20 mm wall thickness. The PBM-30 is also exdcuted with a frequency regulator. The insert holders of the largest PBM machine is suitable for carbide inserts with a cutting length of 16 mm. Thanks to the robust way in which this PBM machine is constructed this machine is still one of the fastest available. PBM-16/PBM-30 CNC-controlled The newest developement is to...

Open the catalog to page 5
PBM-16 - 6

carbide inserts carbide inserts carbide inserts electrically operated clamp electrically operated feed electrically operated pipe-stop copying system maintenance contract clamp range¹ (pipe in inches) turning range (mm) voltage ² (Volt) motor power (kW) clamping clamp operation machining max. wall thickness³ (mm) feed operation feed stroke (mm) speed (r.p.m.) at 50 Hz. size LxWxH (mm) weight (kg) built-in cooling pump

Open the catalog to page 6
PBM-16 - 7

axial / radial electric carbide inserts carbide inserts carbide inserts carbide inserts (¹) Clamping range and turning range can be reduced using optional insert jaws. (²) Other voltages/frequencies can be supplied on request. (³) The maximum wall thickness is unrestricted by machining the pipe several times in succession.

Open the catalog to page 7
PBM-16 - 8

Copying system for PBM machines A copying system can be supplied for the PBM-16 and PBM-30. The copying system allows thin-walled and/or non-round pipes to be machined very precisely and the desired end preparation edge can be made despite the fact that the material is not round. The copying system can be fitted to existing machines (PBM-16 or PBM-30). The original tool head is replaced in that case by a tool head with the copying system that is mounted directly on the main shaft. The tool head with copying system for the PBM-16 has a single carriage with one copying roll and one insert...

Open the catalog to page 8
PBM-16 - 9

Roller benches type TRB The TRB roller benches have been especially de- signed for use in combination with the PBM pipe end preparation machines. The trough system with steel diabolo rollers makes it possible to roll the pipe easily by hand into the machine. Just as the PBM machines the TRB roller benches are extra strong and robust and exceptionally sui- table for heavy work. The height can easily be adjusted electrically with one push on the button. The top part with the V-rolls then moves up or down in its entirety. The desired height can be seen on the scale. Unusual sizes or other...

Open the catalog to page 9
PBM-16 - 10

Insert holder sets for PBM machines Th. Wortelboer BV has developed unique carbide insert holders and carbide inserts for the PBM machines. INSERT HOLDER SETS FOR THE PBM-8 The insert holder sets for the PBM-8 machines consist of four insert holders each with two inserts. The drawing (of the old PBM-12) gives an overview of the insert holders and the pipe sizes that can be machined with the particular set. Each separate insert is positioned in such a way that it can machine a particular size of pipe while the other inserts in effect rotate without doing any work. A set of four insert...

Open the catalog to page 10
PBM-16 - 11

Insert holder sets for PBM machines Below some possibilities of insert holders and (special) inserts. Insert holder for facing Insert holders for beveling “above” each other (wall max. 25 mm) Standard insert with cutting length of 16 mm Custom made insert holder and special insert

Open the catalog to page 11
PBM-16 - 12

PBM specials As well as the standard series of PBM machines Th. Wortelboer BV also supplies special models designed according to specific customer wishes and requirements. The photo on the left shows an older version of the PBM-6 machine that has been designed as a semiautomatic machine. The pipes are positioned in the machine manually up to the pipe-stop. One push on the button causes the pipe to be clamped, the stop to slide back and the rotating cutting head to move towards the material. Once the end preparation has been made the cutting head moves back to its starting position, the...

Open the catalog to page 12

All Th. Wortelboer B.V. catalogs and technical brochures

  1. TU-D series

    2 Pages

  2. SNE-76

    2 Pages

  3. PBM 4

    12 Pages

  4. PBM-6-8

    12 Pages

  5. PBM-30

    12 Pages