ADP 2000 ÷ 9500
4Pages

AIRDRY Adsorption Dehumidifiers

MODEL Performances Dehumidification Capacity * Fans Process air flow Static pressure Static pressure Fan nominal power Drive Motor Nominal power Regeneration Regeneration type Installed power Regeneration type Power output heating Steam consuption at 6Bar(a) Temperature rise in the heating coil Electrical characteristics Power supply Maximum power absorbed standard units Maximum current absorbed standard units Noise level Sound pressure ** Sound power ** * Conditions at 20°C 60% RH ** Sound pressure level calculated in free field, 10 meters from unit, direction factor Q = 2, according to...

Adsorption Dehumidifier PRINCIPLE OF OPERATION The dehumidifier operates with 2 airflows. The main airflow, the PROCESS AIR is what is dehumidified and a second, smaller, airflow is used to regenerate the rotor material. Two high efficiency fan and motor assemblies inside the machine create these separate airflows in opposite directions through the rotor. The PROCESS AIR is taken trough the dehumidification rotor and moisture is taken up by the desiccant material bonded to the rotor structure. Mainly Silica Gel is used, which is a hygroscopic material capable of holding many times its...

Adsorption Dehumidifier VERSIONS AD… AD…/TX AD…/TTX AD…/STC Standard Version with external satin stainless steel frame 304 Version with steel frame completely inox304 interior and exterior satin Construction version, with pivoting wheels Model AD Painted steel frame Satin stainless steel frame 304 Frame totally stainless steel304 and satin finish outside Construction site version with pivoting wheels Frame Handed version Filters G4 process and reactivation Filters F5, F7, F9 Recovery regeneration heat Purge area for low Dew Point Pre-cooling water coil Post-cooling water coil Post-heating...