AD 1000 ÷ 3100

1 / 4 PagesView full catalog

AD 1000 ÷ 3100

Product catalog summary

Technical Specifications

Models: AD 1000, 1500, 2000, 2500, 3100T
Dehumidification Capacity: Ranges from 8.8 kg/h to 18.9 kg/h depending on the model.
Fans: Process air flow ranges from 1000 m3/h to 3100 m3/h with static pressure between 200 to 300 Pa. Reactivation air flow ranges from 350 m3/h to 820 m3/h.
Regeneration: Electric and steam options available with power output heating ranging from 12.0 kW to 28.2 kW.
Electrical Characteristics: Power supply is 400/3/50 ±5% with maximum power absorbed ranging from 12.6 kW to 29.0 kW.
Noise Level: Sound pressure levels range from 64 dB(A) to 68 dB(A).

Principle of Operation

The dehumidifier operates with two airflows: process air and regeneration air. The process air is dehumidified using a rotor with silica gel, while the regeneration air is heated to release moisture from the rotor.

Structure and Components

Casework: Made from painted galvanized steel or optional stainless steel.
Fans: Directly coupled to motors, accessible for maintenance, with optional frequency converter for speed control.
Rotor: Made of desiccant material, capable of withstanding saturated air, and non-combustible.
Transmission System: Belt drive system with visible rotor rotation for maintenance.
Regeneration Air Heating Coil: Available in electric and steam options with modulation for efficiency.
Filters: G4 filters standard, higher grades available on request.

Control and Electrical Panel

PLC Control: Includes functions for temperature regulation, protection, and alarm resets. Compatible with remote BMS systems.
Electrical Panel: Complies with European regulations, includes components for fan and resistance protection.

Versions and Options

Standard and various optional versions available, including stainless steel frames, pivoting wheels, and different filter grades.
Additional options include pre/post-cooling coils, proportional control valves, and ModBus interfaces.

Catalog excerpts

AIRDRY Adsorption Dehumidifiers

Open the catalog to page 1

TECHNICAL DATA MODEL Performances Dehumidification Capacity * Fans Process air flow Static pressure Static pressure Drive Motor Nominal power Regeneration Regeneration type Installed power Regeneration type Power output heating Steam consuption at 6Bar(a) Temperature rise in the heating coil Electrical characteristics Power supply Maximum power absorbed standard units Maximum current absorbed standard units Noise level Sound pressure ** Sound power ** * Conditions at 20°C 60% RH ** Sound pressure level calculated in free field, 1 meters from unit, direction factor Q = 2, according to ISO 9614...

Open the catalog to page 2

Adsorption Dehumidifier PRINCIPLE OF OPERATION The dehumidifier operates with 2 airflows. The main airflow, the PROCESS AIR is what is dehumidified and a second, smaller, airflow is used to regenerate the rotor material. Two high efficiency fan and motor assemblies inside the machine create these separate airflows in opposite directions through the rotor. The PROCESS AIR is taken trough the dehumidification rotor and moisture is taken up by the desiccant material bonded to the rotor structure. Mainly Silica Gel is used, which is a hygroscopic material capable of holding many times its weight...

Open the catalog to page 3

Adsorption Dehumidifier VERSIONS AD… AD…/TX AD…/TTX AD…/STC AD…/M Standard Version with external satin stainless steel frame 304 Version with steel frame completely inox304 interior and exterior satin Construction version, with pivoting wheels Handed version (Process and Regeneration airflows are reversed) AD Model Painted steel frame Satin stainless steel frame 304 Frame totally stainless steel304 and satin finish outside Construction site version with pivoting wheels Frame Handed version Filters G4 process and reactivation Filters F5, F7, F9 Recovery regeneration heat Purge area for low Dew...

Open the catalog to page 4

AD 1000 ÷ 3100

AD 1000 ÷ 3100

Catalog excerpts

All TFT catalogs and technical brochures