AD 100÷1250

Product catalog summary

Technical Specifications
The AIRDRY adsorption dehumidifiers by TECNOFRIGO TUSCANY are available in various models, each with specific performance metrics. The dehumidification capacity ranges from 0.59 to 6.74 Kg/h, depending on the model. The process air flow varies from 100 to 1250 m3/h, with corresponding static pressures and fan nominal power. The units operate on electric regeneration with installed power ranging from 0.9 to 9.9 KW. Electrical characteristics include power supply options of 230/1/50 or 400/3+N/50, with maximum power absorption up to 10.58 KW.

Principle of Operation
The dehumidifiers function using two air flows: process air and regeneration air. Process air passes through a silica gel desiccant rotor, absorbing moisture, while regeneration air removes this moisture by heating and passing through the rotor in the opposite direction. The system operates effectively between -30°C and +40°C.

Structure and Components
The dehumidifier's structure is made of galvanized steel with removable panels for maintenance. Fans are directly coupled to motors and can be manually adjusted. The rotor is made of heat-resistant, non-combustible material, ensuring durability even if fans malfunction. A belt drive system controls rotor movement, and the regeneration air heating coil is self-regulating.

Electrical Panel and Controls
The electrical panel complies with European standards and includes components like a main switch, ammeter, and hour meter. It allows for manual or automatic dehumidification control, with options for continuous fan operation.

Optional Features
Models can be equipped with additional features such as heat recovery for regeneration air, turbo boxes for increased pressure, and electronic humidistats. Different supply voltages and various filter options are also available.

Catalog excerpts

AIRDRY Adsorption Dehumidifiers

Open the catalog to page 1

Static pressure Static pressure Drive Motor Nominal power MODEL Performances Dehumidification Capacity * Fans Process air flow Regeneration Regeneration type Installed power Temp. rise in the heating coil Electrical characteristics Power supply Maximum power absorbed Maximum current absorbed Noise level Sound pressure ** Sound power ** * Conditions at 20°C 60% RH ** Sound pressure level calculated in free field, 10 meters from unit, direction factor Q = 2, according to ISO 9614 DEHUMIDIFICATION CAPACITY Approximate capacity in Kg/h with different relative humidity values of inlet process air...

Open the catalog to page 2

Adsorption Dehumidifier PRINCIPLE OF OPERATION The dehumidifier works by using two air flows; the main one is the air to dehumidify, a second flow - of smaller flow rate - is used to regenerate the dehumidification rotor. Two fans inside the dehumidifier create these two air flows that pass through the rotor in opposite directions. The air to be dehumidified, also called "process air", passes through the silica gel impregnated desiccant rotor. Silica gel is a highly hygroscopic material that absorbs water vapour from the air. As the air passes through the rotor, it transfers its moisture content...

Open the catalog to page 3

Adsorption Dehumidifier Standard Version with heat recuperator for regeneration air (50%-80% recovery). 100 Painted steel frame Satin-finish stainless steel304 frame Turbo box for increased pressure available process air Turbo box for increased pressure available regeneration air Cover box for outdoor installation Heat recovery regeneration air Process and regeneration air flow rate regulator Main power switch Frame in mirror version G3 filters process and regeneration PLC electronic control and touch-screen terminal Different supply voltage Process air filter clogged Regeneration air filter...

Open the catalog to page 4

AD 100÷1250

AD 100÷1250

Catalog excerpts

All TFT catalogs and technical brochures