Plain Weave Woven Roving Glass Tape - 1 Pages

Add to MyDirectIndustry favorites
Plain Weave Woven Roving Glass Tape

Catalog excerpts

Plain Weave Woven Roving Glass Tape • Textile Technologies plain weave woven roving glass tapes are woven with the same warp and weft yarn at 90° angles. • Weaving this product in narrow widths enables wet hand lay-up to be far easier from a weight, cutting and wastage point of view compared with wide fabric. • Woven Roving is not twisted and therefore wets out easily. • No fuzz, dirt or impurities. • Even thickness. • Good covering and degassing properties. • High mechanical strength and high wet strength retention. • Woven Tapes - No Cutting Required. • No Fray. Applications •    It is used primarily for FRP composites produced for hand lay-up for local reinforcements or large moulding presses. •    It is often used in conjunction with chopped strand mat to add bulk and increase stiffness to boats, automobiles and storage tanks. E Glass Fibres MSDS Material Safety Data Sheet Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request. UK Office Tel: 0161 367 1370 Email: Web: Australia Office Tel: 04 0375 3944 Email: HIGH TEMPERATURE TEXTILES AUTOMOTIVE HEAT CONTROL    REINFORCEMENT TEXTILES

 Open the catalog to page 1

All Textile Technologies Europe Ltd catalogs and technical brochures