G-Force / Graphite Impregnated E Glass Webbing - 1 Pages

Add to MyDirectIndustry favorites
G-Force / Graphite Impregnated E Glass Webbing

Catalog excerpts

Graphite Impregnated E Glass Webbing Tape • • • • Woven from uniform textured filaments of high bulk ‘E’ type glass fibre yarns resistant to 550°C, then coated with graphite aqueous dispersions. Inorganic, sterile and incombustible. Resistant to oils, solvents and most chemicals. Low thermal conductivity typically 0.05W/mk. Is suitable for use as thermal insulation to pipes, exhausts and vessels to protect personnel and to minimise heat loss. Can be easily fabricated into seals and gaskets. Can also be used in welding applications for stress relieving and for pre-heat insulation. Industrial boiler, furnace, kiln car door seals Can be used as oven and furnace fillings and linings. Products Product Code Further Information Material Safety Data Sheet E Glass Fibre Textiles Important: Information on the above characteristics is based upon tests we believe to be reliable. The values given are typical values that vary according to application conditions. The values are intended only as a source of information and are given without guarantee and do not constitute a warranty. It should be noted that the substrate test materials are generic and actual results may vary from those given above. Purchasers should independently determine prior to use the suitability of this material for their specific purposes. All Textile Technologies Europe Ltd materials described herein are sold subject to Textile Technologies Europe Ltd conditions of sale, a copy of which is available on request. UK Office Tel: 0161 367 1370 Email: sales@textiletechnologies.co.uk Web: www.textiletechnologies.co.uk Australia Office Tel: 04 0375 3944 Email: sales@texti

 Open the catalog to page 1

All Textile Technologies Europe Ltd catalogs and technical brochures