TECHNICAL DATA SHEET Rev. 00-13/03/2017 MILL PAPER GLAND PACKING MILL PAPER GLAND Description A universal packing for paper mills which is based on a compound fibre that unites very high mechanical resistance (tensile strength 25,000 kg/cm2) with a very low friction coefficient, thereby reducing abrasion by up to one tenth of that produced by aramid fibres, increasing, at the same time, the life of the packing. This fibre has an excellent chemical resistance, and so can even be used in cellulose production where a greater chemical resistance is required compared to normal paper production. The packing is also extremely soft thanks to an exclusive three-stages process of lubrication: on the thread, on the core strand and on the packing with PTFE in suspension, which further reduces the wear of the bushings. Applications It is a packing specifically designed for pumps, pulpers and mixers. Industry Paper mills and with dirty and abrasive fluids. Standard packaging PTFE dispersion, free from APFO-PFOA. Do not use the packing at the maximum temperature and pressure values without consulting Texpack® beforehand. Please check carefully that the products are suitable for your specific application before use. The complete General Terms and Conditions of Sale can be found on www.texpack.it Company with a quality management system certified by DNV - UNI EN ISO 9001. The information in this data sheet is merely indicative and as such it is not possible to check the methods and conditions of use of the product; in this regard the company cannot accept any responsibility Texpack Srl - unipersonale - Via Galileo Galilei, 24 - 25030 Adro (Bs) Italia - Tel.+39 030 7480168 - Fax +39 030 7480201 - [email protected] - www.texpack.it