Moisture and Density Sensors As versatile as you need them In practice, moisture sensors need to cope with very different practical requirements depending on the products to be measured, the range of moistures and temperatures, the amount of samples available, the conditions of measuring points etc. TEWS Elektronik has developed a broad range of microwave sensors of different designs, sizes and sensitivities. Therefore, the instrument that best suits any potential application can be selected. Except for a few models, every sensor can be operated in every measuring instrument, which can also be used for changing applications. The sensors of the new „Blueline®“ model range feature a built-in ID chip which the measuring system reads out for automatic configuration. TEWS Elektronik GmbH & Co. KG . Sperberhorst 10 . 22459 Hamburg . Germany Phone +49.40.555.911-0 . www.tews-elektronik.com

Tubular sensors Tubular sensors are filled with the product to be measured. They are suitable for for single moisture measurements of powders, granules, pellets etc. Samples of free flowing, non-adhesive products are simply poured through a hopper and, after analysis, released into a dish or similar container under the sensor. Samples of sticky or staining substances or materials that are detrimental to human health can be put into a beaker which is then sealed and briefly placed in the sensor for measuring. Tubular sensors are used mainly for laboratory use or for making random sample measuring...