TS-I HV E SERIES

Product catalog summary

Technical Specifications:
The TS-I HV E Series includes two models: TS-I HV 80 E and TS-I HV 100 E. The energy content is 80 kWh and 96 kWh respectively, with nominal voltages of 810 V and 972 V. The operating voltage ranges from 704 V to 913 V for the 80 E model and 845 V to 1096 V for the 100 E model. Both models support a maximum charging/discharging current of 100 A and a C-rate of 1C. The battery cells are Lithium NMC prismatic from Samsung SDI, with a DynamiX Battery Optimizer for cell balancing. Expected cycles at 100% DoD and 70% EoL are 6000 at 1C/1C and 8000 at 0.5C/0.5C. Efficiency is up to 98%, with a standby self-consumption of 5 W.

Environmental and Physical Parameters:
Operating and ambient temperatures range from 0°C to 50°C, with humidity levels between 0 to 80% non-condensing. The cooling system is passive via fins and active via fans. Installation altitude should be below 2000 m above sea level. The TS-I HV 80 E weighs 708 kg, while the TS-I HV 100 E weighs 834 kg. Dimensions for the 80 E model are 2008 x 608 x 990 mm, and for the 100 E model, 2208 x 608 x 990 mm.

Certifications and Standards:
The battery cells comply with IEC 62619, UL 1642, and UN 38.3 standards. The product is certified under CE, UN 38.3, IEC 62619, IEC 62620, IEC 61010, IEC 61508, IEC 61000-6-2/4/7, and the 2006/66/EC Battery Directive. A 10-year performance guarantee and a 5-year system guarantee are provided.

System Configurations:
The TS-I HV 80 E and 100 E models offer various configurations based on the number of battery inverters and modules. For the 80 E model, energy systems range from 80 kWh to 2560 kWh, with outputs from 80 kW to 1360 kW. For the 100 E model, energy systems range from 96 kWh to 3072 kWh, with outputs from 85 kW to 1360 kW. An external DC combiner is required for configurations with eight or more TS HV 90 pro TESVOLT PCS.

TESVOLT PCS Battery Inverter:
The inverter supports configurations from 1 to 4 independent power units (IPUs), with rated active power ranging from 80 kW to 340 kW and rated apparent power from 80 kVA to 346 kVA. The operating voltage range is 680 V to 1200 V, with a maximum efficiency of 97.8%. The inverter is transformer-free and communicates via Modbus TCP/IP.

Additional Information:
TESVOLT offers a free take-back scheme for batteries in Germany. The product is made in Germany, and registration in the myTESWORLD portal is required to use the TESVOLT Energy Manager.

Catalog excerpts

TECHNICAL DATA SHEET TS-I HV E SERIES TS-I HV 80 E | TS-I HV 100 E TECHNICAL DATA FOR BATTERY STORAGE SYSTEM TS-I HV 80 E TS-I HV 100 E Type designation Energy content Nominal voltage Cell balancing Cycles expected @ 100% DoD | 70% EoL | 23°C +/-5°C 1C/1C Cycles expected @ 100% DoD | 70% EoL | 23°C +/-5°C 0.5C/0.5C Efficiency (battery) Self-consumption (standby) Operating temperature Ambient temperature Cooling concept Altitude of installation site Weight Total Weight Cabinet Battery module Battery management system (APU) Lithium NMC prismatic (Samsung SDI) DynamiX Battery Optimizer 6000 5 W (without battery inverter) 0°C to 50°C 0 to 80% (non-condensing) Passive via fins and active via fans Tilt height Certificates/standards Cell Guarantee Recycling Protection class Protection class 2155 mm (front/back)/ 2090 mm 2358 mm (front/back)/ 2160 mm (lateral) (lateral) 10-year performance guarantee, 5-year system guarantee TESVOLT offers a free take-back scheme for batteries from Germany

Open the catalog to page 1

This table displays the possible output depending on the energy and the number of battery inverters and modules. Quantity Energy TS HV 90/ system 10-20 [kWh] A connection to the low-voltage grid according to VDE AR-N 4105 must be coordinated with the local energy supplier. With eight or more TS HV 90 pro TESVOLT PCS, an external DC combiner is required. This is not part of TESVOLT's scope of delivery and must be configured on a project-specific basis.

Open the catalog to page 2

This table displays the possible output depending on the energy and the number of battery inverters and modules. Quantity Energy TS HV 90/ system 12-20 [kWh] A connection to the low-voltage grid according to VDE AR-N 4105 must be coordinated with the local energy supplier. With eight or more TS HV 90 pro TESVOLT PCS, an external DC combiner is required. This is not part of TESVOLT's scope of delivery and must be configured on a project-specific basis.

Open the catalog to page 3

TECHNICAL DATA FOR TESVOLT PCS BATTERY INVERTER 1 independent power unit (IPU) Rated active power Rated apparent power Rated AC current Rated DC current DC short-circuit current (< 1 s) Operating voltage AC Grid frequency DC voltage range Dimensions (H x W x D) Tilt height Max. efficiency Operating temperature Weight Protection class Certificates and permits Noise level approx. 390 kg approx. 530 kg approx. 670 kg approx. 820 kg Modbus TCP/IP Transformer-free Am Heideberg 31 | 06886 Lutherstadt Wittenberg Germany TNs project hai received fuvcfng from ttie European LMon': Hoftron 2020 rowarcti...

Open the catalog to page 4

TS-I HV E SERIES

TS-I HV E SERIES

Catalog excerpts

All TESVOLT AG catalogs and technical brochures