Data sheet testo DiSCmini Nanoparticle measuring instrument testo DiSCmini – the handy and reliable solution for measuring aerosols. Monitoring of ambient air in traffic or indoors #/cm3 Spot measurements in aerosol-charged workplaces (e.g. welding, soldering and in foundries) nm Operation without further operating materials such as solvents or radioactive radiation sources High-tech in a handy format All measurement values easily legible on the display testo DiSCmini is the worldwide smallest particle counter The simultaneous recording of particle number available on the market. It measures the number and mean concentration and particle size enables you to determine diameter of nanoparticles based on the electrical charging particle surface area (Lung Deposited Surface Area, LDSA) of aerosols. Since the operation of the portable testo The high measurement frequency of 1 Hz for all three DiSCmini is independent of its position, it can be moved measurement parameters enables the detection of rapid and turned without restrictions during the measurement. This insensitivity to vibrations as well as its small dimensions make the measuring instrument ideal for mobile In permanent operation, the battery lasts 8 hours. All monitoring and spot measurements in immission-risk data are stored on an internal SD card and can also be workplaces or public areas with high levels of traffic. transferred to a computer via USB cable.

testo DiSCmini Technical data/accessories Technical data Particle size Mains cable 2 m cable length, Euro plug Battery life Typically 8 hours with a fully charged battery, depending on ambient temperature Mains cable 2 m cable length, AU plug Mains unit, 100 to 120 volt or 200 to 240 volt 50/60 Hz for charging battery Mains cable 2 m cable length, GB plug Mains cable 1.8 m cable length, US/JP plug Voltage supply Order no. ±30 % typical for size and number Dimensions Weight The evaluated particle concentration depends on the particle size distribution and the mean measurement time. The following...