Fine particle measuring system
8Pages

{{requestButtons}}

Catalog excerpts

Fine particle  measuring system - 1

Data sheet testo 380 Fine particle measuring system testo 380 – The innovative complete solution In combination with testo 330-2 LL, the innovative complete solution for solid fuels, oil and gas systems. Unrestricted TÜV test for the limit value levels 1/2 and according to VDI 4206 Sheet 2 Parallel measurement of fine particles, O2 und CO Graphic presentation of all measurement values in real time Especially economic in operation and maintenance Effortless handling and easy transport High-tech in a case: Measurement of all relevant values with only one probe mg/m3 The constantly growing number of solid fuel systems The „command centre“ of the testo 380 is the proven lleads to a further increase in the emission of fine particles. emission analyzer testo 330-2 LL. When you take it out The new amendment to the 1. BImSchV prescribes fine of the case, you can as usual determine, among other particle measurement, presenting chimneysweeps, heating things, flue gas, flue draught and pressure on gas and oil constructors and service technicians with new challenges. systems. In connection with the testo 380, the simultaneous With the new fine particle measuring system testo 380, measurement of O2, CO and fine particles is possible for the fine particles can for the first time be measured simply on first time. site. The completely new measurement method developed by Testo enables easy monitoring and implementation of the fine particle limit values. Combustion systems can be optimized to minimum emissions with the system.

Open the catalog to page 1
Fine particle  measuring system - 2

Overview of the measurement system The fine particle measuring system testo 380 consists of two system components: the fine particle analyzer testo 380 including fine particle probe, and the testo 330-2 LL as a command centre and a flue gas analyzer. Together, this system offers the highest possible level of compactness, ease of handling and precision in the measurement of solid fuel, oil and gas systems. Fine particle case for easy transport of the fine particle measuring system. The entire measurement technology is contained in a convenient case with a weight of only 7.9 kg. Fine particle...

Open the catalog to page 2
Fine particle  measuring system - 4

Innovative technology The fine particle probe Everything you need for your professional fine particle measurement is contained in Testo‘s own development, the handy fine particle probe. The probe samples the raw gas directly from the flue gas flow and transports it to the testo 330-2 LL for flue gas analysis. Simultaneously, the raw gas is mixed with fresh air in the rotation diluter – creating the necessary measurement gas for the fine particle measurement. The fine particle probe is also responsible for the measurement of the flue gas temperature and the flue draught. The probe is...

Open the catalog to page 4
Fine particle  measuring system - 5

Ordering data testo 380 fine particle analyzer testo 380 fine particle measuring system • Without flue gas analyzer testo 330-2 LL (already owned testo 330-2 LL from version 2010 can be used after a Firmware update) • testo 380 fine particle analyzer with fine particle probe and cleaning set • Flue gas analyzer testo 330-2 LL with mains unit (incl. Bluetooth, H2compensated CO cell) • Modular flue gas probe 300 mm • Combustion air temperature probe 190 mm Accessories Flue gas analyzer testo 330-2 LL Bluetooth testo 330-2 LL flue gas analyzer set with Longlife gas sensors; BLUETOOTH® and...

Open the catalog to page 5
Fine particle  measuring system - 6

Probes and accessories testo 330-2 LL Retrofits / spare gas sensors CO sensor (without H2-compensation) for testo 330-1 LL/-2 LL Spare COlow sensor for testo 330-1 LL/-2 LL Spare NO sensor, 0 to 3000 ppm for testo 330-1 LL/-2 LL Upgrade NO-sensor; 0 to 3000 ppm; resolution 1 ppm NOlow spare sensor 0 to 300 ppm, 0.1 ppm, ±2 ppm (0 to 39.9 ppm) ±5% of m.v. Modular flue gas probes Flue gas probe modular, incl. cone for attachment; thermocouple NiCr-Ni; hose 2.2 m; particle filter; length 180 mm; Ø 8 mm; Tmax. 500 °C; TÜV-tested Flue gas probe; length 300 mm; Ø 8 mm; Tmax. 500 °C; TÜV approval;...

Open the catalog to page 6
Fine particle  measuring system - 7

Probes and accessories testo 330-2 LL Combustion air temperature probes Combustion air temperature probe, immersion depth 190 mm Combustion air temperature probe, immersion depth 60 mm Additional temperature probes Mini ambient air probe; for separate ambient air temperature measurement; 0 to +80 °C Very fast reaction surface probe Connection cable Mains unit international 100-240 V AC / 6.3 V DC for mains operation or battery charging in instrument Smoke tester with oil and soot sheet, for measuring soot in flue gas, excl. cone (part no. 0554 9010) Hose connection set with adapter for...

Open the catalog to page 7
Fine particle  measuring system - 8

Technical data Measuring range, accuracy, resloution 0 to 300 mg/m³ Measuring range Other instrument information Storage and transport temperature Operating temperature Protection class Housing material Power supply via internal mains unit: 100 V AC/0.45 A to 240 V AC/0.2 A (50 to 60 Hz) Power consumption Information fine particle probe 270 mm Probe shaft diameter Probe shaft material Probe cable length Integrated elements Draught measurement, sampling, temperature measurement, probe heating, rotation diluter Probe shaft heating Rotation diluter Status display LED, shows warm-up phase and...

Open the catalog to page 8

All TESTO catalogs and technical brochures

  1. testo 317-3

    4 Pages

  2. testo 316-1

    8 Pages

  3. testo-315-3

    4 Pages

  4. testo 440

    12 Pages

  5. testo 400

    12 Pages

  6. Huminator

    2 Pages

Archived catalogs