Differential pressure measuring instrument - testo 510

Product catalog summary

Overview: The testo 510 is a compact differential pressure measuring instrument designed for precise measurements in the range of 0 to 100 hPa. It features temperature compensation for accurate readings and can display measurements in various units. The device is equipped with a backlit display for easy reading in low-light conditions and includes magnets for hands-free operation.

Key Features:

Differential Pressure Measurement: Measures from 0 to 100 hPa with temperature compensation.
Flow Velocity Measurement: Can be used with a Pitot tube to measure air flow velocity, with air density compensation for accuracy.
Display and Usability: Backlit display for visibility in poor lighting; compact and easy to operate.
Selectable Units: Offers 10 units including hPa, mbar, Pa, mmH2O, inH2O, inHg, mmHg, psi, m/s, and fpm.

Technical Specifications:

Positive Pressure: Up to 500 mbar.
Maximum Static Pressure: 1.5 bar.
Operating Temperature: 0 to +50 °C.
Storage Temperature: -40 to +70 °C.
Protection Class: IP40.
Battery: 2 AAA batteries with a life of 50 hours (without display illumination).
Measurement Rate: 0.5 seconds.
Dimensions and Weight: 119 x 46 x 25 mm, 90 g (with batteries and protective cap).
Warranty: 2 years.

Accuracy and Resolution:

Measurement Range: 0 to 100 hPa.
Accuracy: ±0.03 hPa (0 to 0.30 hPa), ±0.05 hPa (0.31 to 1.00 hPa), ±(0.1 hPa + 1.5% of mv) (1.01 to 100 hPa).
Resolution: 0.01 hPa.

Accessories:

Connection Hose: Silicone, 2 m long, max load 700 hPa (mbar).
ISO Calibration Certificates: Available for differential pressure at 3 or 5 points distributed over the measurement range.

Catalog excerpts

Differential pressure measuring instrument - testo 510-1

Differential pressure measuring instrument differential pressure Differential pressure measurement 0 to 100 hPa Flow velocity measurement possible with Pitot tube Temperature and air density compensation Display illumination testo 510 measures differential pressure in the range from 0 to 100 hPa. The differential pressure measurement is temperature-compensated for accurate measurement values. The measurement values can be displayed in Pascal over the entire measurement range. Magnets at the rear permit free-hand work. The backlit display allows the measurement values to be easily read out, even in unfavourable light conditions. The testo 510, in combination with a Pitot tube, measures air flow velocity. For accurate measurement values, the air density can be compensated. testo 510 is very handy, small and easy to operate.

Open the catalog to page 1

Differential pressure measuring instrument - testo 510-2

Technical data / Accessories Sensor type Differential pressure sensor testo 510 handy measuring instrument for differential pressure incl. protection cap, batteries and calibration protocol General technical data Accessories for measuring instrument

Open the catalog to page 2