32-25 Coefficient of Friction Tester
1Pages

{{requestButtons}}

Catalog excerpts

32-25 Coefficient of Friction Tester - 1

Testing Machines Inc. 2 Fleetwood Court Ronkonkoma, NY 11779 Tel: (631) 439-5400 Fax: (631) 439-5420 Info@testingmachines.com Büchel BV t/a Messmer Büchel Fokkerstrat 24, 3905 KV Veenendaal, Netherlands Tel:+31 (0)318 521500 Fax:+31 (0)318 540358 Lako Tool and Manufacturing Inc. 7400 Ponderosa Road Perrysburg, Ohio 43552 Tel: (419) 662-5256 Fax: (419) 662-8225 Lawson Hemphill 1658 G A R Highway Swansea, MA 02777 Tel: (508) 679-5364 Fax: (508) 679-5396 Information@ lawsonhemphill.com Adamel Lhomargy SARL Z.A. de l’Habitat, Bâtiment 6 Route d’Ozoir, 77680 Roissy en Brie, France Tel:+33 (0) 1 6440291 Fax:+33 (0) 1 64409211 TMI Canada P.O. Box 203 Pointe-Claire Dorval QC, H9R-4N9 CAN Tel: (514) 426-5855 Fax: (514) 426-1557 www.testingmachines.com www.lakotool.com www.lawsonhemphill.com Coefficient of friction 32-25 Slide Angle Friction is a measurement of a sheet like substrate such as paper, corrugated, plastic film or paperboard which determines the angle of inclination at which one substrate affixed to a sled will begin to slide/slip against another substrate of a similar material. During a test, an inclined plane is increased at a rate of 1.5 ± 0.5º per second by an electric motor until the test block begins to slide. The initial movement of the sled is the Slide Angle or Coefficient of Static Friction of the material. When the test block just begins to slide a photo-optical sensor automatically stops the inclined plane and the operator can read the slide angle result. A variety of factors can affect the Slide Angle measurements including abrasion, coatings, varnishes, printing and most importantly humidity. APPLICATIONS Paper, plastic film, packaging films, paperboard, corrugated and other sheet like materials SPECIFICATIONS • 0 to 80º angle • Conforms to TAPPI T 815, T 458 and ASTM D 202 with optional sliding blocks FEATURES • Motor-driven elevation • Simple, low-cost measurement of static COF • Photo sensor automatically stops the test after initial sled movement •Measures only Slide Angle or Coefficient of Static Friction OTHER • A horizontal plane method is also available to measure Static and Kinetic Coefficient of Friction • See models 32-07, 32-71 and 32-91 ORDERING INFORMATION Catalog number 32-25-00 (COF Inclined Plane Tester) Electrical: Specify voltage requirements when ordering Sliding blocks (1 required) Catalog number T 503 sliding block for shipping sacks 3.5 in. x 4 in., 1260 g 32-25-02 Sliding block for fiberboard 2 in. x 4 in., 750 g 32-25-03 D 202 sliding block for electrical insulation paper; 2.5 in. x 3 in., 235 g 32-25-04 T 548 sliding block for printed paper 2.5 in. x 2.5 in., 200 g 32-25-05 Sled for COF: 1.5 in. x 3.5 in. ; 500 g 32-25-08 T 815 sliding block for fiberboard 3.5 in x 4 in., 1300 g 32-25-12 Custom sliding blocks available upon request PHYSICAL SPECIFICATIONS W x D x H: 560 x 130 x 280 mm (22 x 5 x 11 in.) Weight: 7 kg (16 lb)

Open the catalog to page 1

All Testing Machines Inc catalogs and technical brochures

  1. GraphMaster

    2 Pages

  2. SD-200L

    2 Pages

  3. tear-tester

    2 Pages

  4. Heat Sealer

    4 Pages

  5. Hygrometer

    1 Pages

  6. Photovolt

    2 Pages

  7. Probe Tack

    2 Pages

  8. Pulp Beater

    1 Pages

  9. Tear Tester

    1 Pages