test machine Class 1 ■ servo controlled / manually controlled For determining the compressive and flexural strength of cement and mortar prisms TESTING Bluhm & Feuerherdt GmbH Motzener Strasse 26 b ■ 12277 Berlin ■ Germany

Compression-bending test machine Technical features Test machine combination and force display on stable base unit, EN 196-1, etc. ■ Test chamber guard made of polycarbonate in accordance ■ Accuracy to EN ISO 7500-1: Class 1 / Class 2 ■ Force measurement via electronic pressure transducers Digital display or pressure gauge display ■ Control of the test force: Manual or servo control ■ Interface and printer connection are possible (not for machines with pressure gauge display) Measurement ranges of machines with digital display: Pressure: 5... 250 kN (servo), 7.5 -250 kN (manually controlled)...

I Compression test machine, 250 kN ■ Stable base with hydraulic unit ■ Servo control with "manifold" for optimum control quality ■ Closed loop controlled ■ Option: PC control and printer connection ■ Force measured by electronic load cells ■ Test chamber guard made of polycarbonate Distance between the machine platens: 60 mm Distance between the pillars: 220 mm safe?sure! TEST^NGDE _| Machine platens to ASTM C109 _I Machine platens in accordance with EN 196-1:40 x 40 mm _I Optional equipping with laptop and software

I Combined compression-bending test machine, 250 kN/15 kN EN 196-1, ASTM C109, with round machine platens for recording different pressure Stable base with hydraulic unit Servo control with "manifold" for optimum control quality Servo valve and filter (closed loop controlled) Digital controller Option: PC control and printer connection Force measured by electronic load cells Test chamber guard made of polycarbonate Measurement ranges: Machine platen diameter: Distance between the machine platens: Piston stroke: Distance between the pillars: safe?sure! TEST^NGDE | Bending assembly for prisms 40...