Due to its wide performance spectrum, the Testboy Profi LED is one of the most sought after products in our assortment. The Testboy Profi LED combines the following five functions in one device: | Displays DC and AC voltages from 12 to 690V | Single-pole phase testing | Two-pole phase sequence testing | Continuity testing up to 500kΩ | RCD fault testing The professional appearance is underlined by the mix of materials used in the plastic housing and the rubber handle. The display area is protected by a break-proof plastic disk. Your advantages: | 3 years manufacturer’s warranty | TÜV / GS tested and approved | IEC/EN 61243-3, DIN VDE 0682-401 To ensure that the protective earth can also be tested, the automatic load function prevents the RCD switch from being triggered. Even when in daily use, the robust construction as well as the dust and waterproof housing guarantee a long service life. The test tips are protected by a removable cap that in turn is secured to the device. The Testboy Profi LED is even with empty batteries operational for the voltage and phase test. Technical Details Testboy Profi LED Display optical, 10 LEDs, red Operating Panel finger tip Measurement Range automatic range Voltage Test 12 to 690V AC/DC, 0 to 400 Hz Continuity Test 0 to 500 kΩ with acoustical signal Phase Indication > 100V AC Automatic Resistance Is ~ 30mA ED(DT) = 30 sec. Power Supply 2x 1,5V Overload Category CAT III 690V Dimension 238 x 70 x 30 mm Protection IP 65 Weight 200g

TÜV / GS IEC/EN 61243 - 3 Colour red - black, other colours on request Scope of Delivery 1 x operating instructions 2 x battery type AAA LR03 Supplies, Optional readiness bag