Due to its wide performance spectrum, the Testboy Profi LCD is one of the most sought after products in our assortment. The Testboy Profi LCD combines the following five functions in one device: | Displays DC and AC voltages from 12 to 690V | Single-pole phase testing | Two-pole phase sequence testing | Continuity testing up to 2000Ω | RCD fault testing An automatic switch-off function prevents battery drain. However, the Testboy Profi LCD is still able to perform phase test should the batteries be defective or flat. Your advantages: | 3 years manufacturer’s warranty | TÜV / GS tested and approved | IEC/EN 61243-3, DIN VDE 0628-401 Technical Details Display Operating Panel Testboy Profi LCD optical, 3½digit LCD, LCD for phase and rotary field, 3 LEDs for ACV, DCV, Ω and Data-Hold finger tip, ON/OFF button, D-H button Measurement Range automatic range Voltage Test 12 to 690V AC/DC, 0 to 400Hz Resistance Test 0 - 2000Ω Continuity Test 0 ~ 35Ω with acoustical signal Phase Indication > 100V AC Automatic Resistance Is ~ 30mA ED(DT) = 30 sec. Power Supply 2x 1,5V Overload Category CAT III 690V Dimension 238 x 70 x 30 mm Protection IP 65 Weight 200g TÜV / GS IEC/EN 61243 - 3 Colour red - black, other colours on request Scope of Delivery 1 x operating instructions 2 x battery type AAA LR03 Supplies, Optional readiness bag

ACDLTiTK FIELD OPTICil KlS'iTlHti