1. Catalogs
  2. Testboy
  3. Testboy Profi LCD Plus

Testboy Profi LCD Plus

Testboy Profi LCD Plus

Testboy Profi LCD Plus

Product catalog summary
Overview:
The Testboy Profi LCD Plus is a versatile and highly sought-after testing device, offering a wide range of features in a single unit. It is designed for professional use, particularly by service or installation technicians.

Key Features:
  • Displays DC and AC voltage from 6 to 1000V.
  • Single-pole phase testing and two-pole phase sequence indication.
  • Continuity testing up to 150Ω with an acoustic signal.
  • Resistance testing up to 2000Ω.
  • Diode testing capability.
  • Data-Hold function for retaining measurements.
  • Backlight lever sensor for improved visibility.
  • RCD testing lever with two buttons to prevent accidental triggering.
  • LED torch lamp for illumination.
  • Removable 4 mm test tips adaptor.
  • Auto-Power-Off function to conserve battery life.

Design and Safety:
The device features a robust design with a break-proof plastic display cover and a rubber handle for a professional appearance. It includes a buzzer that sounds at voltages over 35V to indicate potential life risk. The switchable load button prevents unintended RCD switch activation, allowing for protective earthing conductor measurement.

Advantages:
  • 5-year manufacturer’s warranty.
  • TÜV/GS tested and approved.
  • Complies with IEC/EN 61243-3 (DIN VDE 0628-401) standards.

Technical Specifications:
  • Display: Optical 3 1/2 digit LCD.
  • Measurement Range: Automatic range.
  • Voltage Test: 6 - 1000V AC/DC, 0-400Hz.
  • Resistance Test: 0 - 2000Ω.
  • Continuity Test: 0 ~ 150Ω with acoustical signal.
  • Phase Indication: > 100V AC.
  • Switchable Load: Is ~ 30mA ED(DT) = 30 sec.
  • Power Supply: 2x 1.5V batteries.
  • Overload Category: CAT IV 1000V.
  • Dimensions: 238 x 70 x 30 mm.
  • Protection: IP 65.
  • Weight: 200 g.
  • Color: Red/black, other colors available on request.

Scope of Delivery:
  • 1x Operating instruction.
  • 2x Battery type AAA LR 03.
  • Optional supplies include a carrying bag.
See more

Catalog excerpts

Testboy Profi LCD Plus-1

Due to its wide performance spectrum, the Testboy Profi LCD Plus is one of the most sought after products in our assortment. The Profi LCD Plus combined the following 12 features in one unit: | Display DC and AC voltage from 6 to 1000V | Single–pole phase testing | Two – pole phase sequence indication | Continuity testing up to 150Ω (acoustically) | Resistance testing up to 2000Ω | Diode testing | Data – Hold | Backlight lever sensor | RCD – testing lever two button | LED torch lamp | Removable 4 mm test tips adaptor | Auto – Power - Off An Auto - Power - Off function impeded a fast discharging of the battery. The extremely accurate LC display is particularly professional; service or installtion technicans are easily able to display the phase or phase sequence. When the probe tips are connected to an AC voltage within the nominal voltage range, the reading is displayed in volts and the “+~-” LED indicator lights up. From a voltage more than 35V (life risk) a buzzer sounds up. The switchable load per button impeded the unmeant triggering of the RCD – switch, so that the protective earthing conductor can be measure as well. The professional appearance is underlined by the mix of materials used in the plastic housing and the rubber handle. The Display area is protected by a break proof plastic disk. Your advantages: | 5 years manufacturer’s warranty | TÜV/GS tested and approved | IEC/EN 61243-3 (DIN VDE 0628-401) Technical Details Testboy Profi LCD Plus Display optical 3 1/2 digit, LCD Operating panel fi nger tip, RCD button, ON/OFF button, D–Hold button Measurement Range automatic range Voltage Test 6 -1000V AC/DC, 0- 400Hz Resistance Test 0 - 2000Ω Continuity Test 0 ~ 150Ω with acoustical signal

 Open the catalog to page 1
Testboy Profi LCD Plus-2

Phase Indication > 100V AC Switchable load Is ~ 30mA ED(DT) = 30 sec. Power supply 2x 1,5V Overload category CAT IV 1000V Dimension 238 x 70 x 30 mm Protection IP 65 Weight 200 g TÜV / GS IEC/EN 61243 - 3 Colour red/black, other colours on request Scope of delivery 1x operating instruction 2x battery type AAA LR 03 Supplies, optional bag

 Open the catalog to page 2

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.