Measurement electronics Measurement electronics E813 for external force and torque sensors High-performance digital electronics with replaceable digital storage (SD memory chip) for recording of peak values and test series in csv le format (Excel™ compatible). Alternatively, continuous data (ASCII) transfer is possible via USB 2.0. Furthermore, force limits can be congured as switch-off criteria, optionally also stroke limits with connection of a path signal, e.g. by TesT testing devices. Power is supplied by commercially available AA NiMH batteries. Supports TEDS technology for automatic sensor detection. Scope of delivery: CD with manuals | CD with virtual COM port driver (optionally visualization software W913) | 230V/50Hz charger with integrated charging electronics | 3 NiMH batteries | Factory calibration certicate | Operating manual | Carrying Case Sensor interface TEDS IEEE-1451 compatible interface for unlimited automated strain gauge sensor detection, 8 memory slots for conventional strain gauge sensors Technical Data • 32-bit RISC microprocessor • A / D converter: 24-bit • Measuring frequency: 50…2000 Hz • Backlit graphic LCD display: 7 digits + point • Data recording on integrated 2 GB SD Memory Card • Analogue output port 0…2 V DC (optional 2-point calibration) • 2 open collector output ports for controlling external devices • Optional connection of an incremental path signal (5 V TTL) • Die-cast aluminium housing RAL7035 with recessed grips with 2 M6 mounting holes both on each front side and on the backside for exible installation into testing devices • Operating time ≥ 10 h • Dimensions H×W×D: (170 × 75 × 35) mm • Weight: ~ 820 g W913 software for E813 + K323 Features • Recording of measurement curves with measuring frequency of up to 2000 Hz • Live display of measured values as numeric values and graph • Free scaling of plot • Automatic maximum and minimum determination • Manual evaluation of a measuring point on the curve • Determination of average values over curve section • Data in Excel™-compatible *.csv format • Chart export (*.jpg, *.bmp) • Storage and recall of existing measurement series • Generation of test reports in *.pdf format, including integration of a company logo, free documentation elds, comment eld, and results (max, min, med, fractional value) • Languages: German, English, French, Spanish and Italian System requirements: • Windows™ XP, Vista™ and Windows™ 7 (32-bit and 64-bit) • Hard disk space min. 10 MB + measurement data • At least 1 GB of RAM Storage case We deliver all instruments with non-ageing, rugged plastics case. We recommend the storage case for protection during transport and storage.