Electrical Force Transducers – Model 344 n n n n n n n n n The electrical force transducers of the model series 344 are used for compressive measurements between 2kN and 500kN. They are suitable for applications under rough conditions because they are made of stainless steel as well as hermetically sealed. Due to their convex compression piece a precise force transmisson is ensured Capacities: 2kN to 500kN For tensile forces Stainless steel Hermetically sealed High accuracy Sensitivity: 2mV/V For dynamic applications For rough environments TEDS module available 1) to achieve excellent measurement results. On demand you receive model 344 also with TEDS module inside the plug. Model 344 >> Technical data according to VDI / VDE directive 2638 Zero signal when removed Rated characteristic value Relative error of characteristic value Relative linearity error Relative repeatability error in unchanged mounting position Combined error Reference temperature Rated temperature range Operating temperature range Storage temperature range Relative creep Relative creep Temperature effect on characteristic value per 10K Temperature effect on zero signal per 10K Input resistance Output resistance Insulation resistance Max. excitation voltage Rated range of excitation voltage Limit force Breaking force Max. permissable dynamic load 2) Ldy % 1) TEDS = Transducer Electronic Data Sheet acc. to IEEE 1451.4 TesT Deutschland: Helena-Rubinstein-Straße 4 | 40699 Erkrath | Fon: +49 211 2099030 | Fax: +49 211 209903201 | [email protected] | www.test-gmbh.com TesT Schweiz: Bösch 63 | 6331 Hünenberg | Fon: +41 41 7856010 | Fax:

Electrical Force Transducers – Model 344 Connection Drawing TesT Deutschland: Helena-Rubinstein-Straße 4 | 40699 Erkrath | Fon: +49 211 2099030 | Fax: +49 211 209903201 | [email protected] | www.test-gmbh.com TesT Schweiz: Bösch 63 | 6331 Hünenberg | Fon: +41 41 7856010 | Fax: +41 41 7856015 | [email protected] | www.test-ag.