Catalogs >
TesT GmbH >
Electrical Load Cells – Model 612

Electrical Load Cells – Model 612
2Pages

Catalog excerpts

Electrical Load Cells – Model 612 n n n n n n n n n The shear beam load cells of the model series 612 are typically used for the construction of industrial weighing or batching systems, e.g. for container or tanks. The load cells that are made of stainless steel are excellently suitable for applications under rough, industrial conditions. A TEDS module inside the plug is also possible on Capacities: 500kg to 15t Shear beam load cell Calibratable acc. to OIML R60 Standard, class C3 or C4 Resistant to lateral forces Stainless steel Highest accuracy Sensitivity: 2mV/V TEDS module on demand 1) demand. The model 612 is available in the standard version and in the calibratable versions according to OIML R 60, accuracy classes C3 and C4. Model 612 >> Technical data according to OIML R 60 Symbol Unit Standard C3 C4 Number of scale intervals Minimum scale division Zero signal when removed Nominal rated sensitivity Sensitivity tolerance Combined error Non linearity Nominal temperature range Operating temperature range Storage temperature range Temperature coefficient of sensitivity per 10K Temperature coefficient of zero signal per 10K Input resistance Output resistance Insulation resistance Maximum excitation voltage Reference excitation voltage Nominal range of excitation voltage Limit load Breaking load Max. permissable side load Degree of protection according to DIN 60529 1) TEDS = Transducer Electronic Data Sheet acc. to IEEE 1451.4 Centered data is valid for all three device classes TesT Deutschland: Helena-Rubinstein-Straße 4 | 40699 Erkrath | Fon: +49 211 2099030 | Fax: +49 211 209903201 | test@test-gmbh.com | www.test-gmbh.com TesT Schweiz: Bösch 63 | 6331 Hünenberg | Fon: +41 41 7856010 | Fax: +41 41

Open the catalog to page 1

Electrical Load Cells – Model 612 Dimensions in mm Model 612 Capacities Connection Drawing Advice for load in tensile direction: For load application please pay attention to an installation that is free of lateral forces, if neccessary use rotating intermediate parts or joint heads with shackles. For safety reasons you should use arresting cables, straps or chains when other mechanical protection is not existing. TesT Deutschland: Helena-Rubinstein-Straße 4 | 40699 Erkrath | Fon: +49 211 2099030 | Fax: +49 211 209903201 | test@test-gmbh.com | www.test-gmbh.com TesT Schweiz: Bösch 63 | 6331...

Open the catalog to page 2

Electrical Load Cells – Model 612 2Pages

Catalog excerpts

All TesT GmbH catalogs and technical brochures

Electrical Load Cells – Model 612
2Pages