Catalogs >
TesT GmbH >
Electrical Force Transducers – Model 307

Electrical Force Transducers – Model 307
2Pages

Catalog excerpts

Electrical Force Transducers – Model 307 - 1

Electrical Force Transducers – Model 307 n n n n n n n n n n Size I Capacities: 20N to 500N (I) And 1kN to 25kN (II) For compression and tension Stainless steel / Aluminum Highest accuracy Also as calibration version Reference transducer up to 2kN Sensitivity: 2mV/V TEDS module (inside sensor) 1) With threaded connector The electrical force transducers of the model series 307 are suitable for compressive and tensile measurements. The sensors that are made of stainless steel or alumi- num (depending on capacity) are available in two sizes. They are suitable for static applications as well as for slightly dynamic applications while a TEDS module is already in- tegrated inside the devices. On demand you receive the model 307 in version Cl. 00 which achieves class 00 according to ISO 376 and is used for calibration purposes. Model 307 >> Technical data according to VDI / VDE directive 2638 Zero signal when removed Rated characteristic value Relative error of characteristic value Relative linearity error Relative repeatability error in unchanged mounting position Combined error Reference temperature Rated temperature range Operating temperature range Storage temperature range Relative creep Relative creep Temperature effect on characteristic value per 10K Temperature effect on zero signal per 10K Input resistance Output resistance Insulation resistance Max. excitation voltage Rated range of excitation voltage Limit force Breaking force Max. permissable dynamic load 3) Ldy % ≤ 50 Degree of protection acc. to DIN 60529 1) TEDS = Transducer Electronic Data Sheet acc. to IEEE 1451.4 2) The class 00 is suitable as reference force transducer acc. to ISO 376 and also suitable for calibrations of materials testing machines acc. to ISO 7500-1. TesT Deutschland: Helena-Rubinstein-Straße 4 | 40699 Erkrath | Fon: +49 211 2099030 | Fax: +49 211 209903201 | test@test-gmbh.com | www.test-gmbh.com TesT Schweiz: Bösch 63 | 6331 Hünenberg | Fon: +41 41 7856010 | Fax:

Open the catalog to page 1

Electrical Force Transducers – Model 307 - 2

Electrical Force Transducers – Model 307 Advice for tensile force measurements: Connection Drawing For force transmission please pay attention to an installation that is free of lateral TEDS Data forces, if neccessary use rotating intermediate parts or joint heads with shackles. For safety reasons you should use arresting cables, straps or chains when other mechanical protection is not existing. # Shield Classification according to ISO 376 Relative deviation of the force gauge % of reproducability b Expanded uncertainty of applied calibration force (level of confidence 95 %) % TesT...

Open the catalog to page 2

Electrical Force Transducers – Model 307 2Pages

Catalog excerpts

All TesT GmbH catalogs and technical brochures

Electrical Force Transducers – Model 307
2Pages