Force Gauges Mechanical hand dynamometer M1191 The force transmission of the device is connected to counter-mounted high-precision measuring springs. The change of displacement is detected by a precision micrometre dial and is scaled proportionally to the force in Newton, alternatively in kg or lbs. An integrated trailing pointer serves to display the peak values. Scope of delivery Force transmission accessories: Compression piece, extension, drawbar | Factory calibration certicate | Operating instructions | Carrying case Available force measuring ranges 50, 100, 200, 500 N Technical Data • Measurement uncertainty: ≤ ± 1 % full scale • Resolution: 100 mark lines • Display: Dial gauge Ø 50 mm • Aluminium housing in RAL5010 with 2 M6 mounting holes on each front side for exible installation • Dimensions H×W×D: (180 × 76 × 38) mm • Weight: ~ 800 g Force Gauges The base starter model with digital peak value memory. Power is supplied by standard AA NiMH batteries that can be recharged via a mini-USB 2.0 interface. Scope of delivery Force transmission accessories: Compression piece, extension, hook (up to 1000 N) | CD with manuals | 230V/50Hz charger | 3 NiMH batteries | Certicate of factory calibration | Operating manual | Carrying case Available force measuring ranges 20, 50, 100, 200, 500, 1000, 2000, 5000 N Technical Data • Measurement uncertainty: ≤ ± 0.1 % full scale • 32-bit RISC microprocessor • A / D converter: 16-bit • Measuring frequency: 1000 Hz • Backlit LCD display: 5 digits + point • Die-cast aluminium housing in RAL7035 with recessed grips with 2 M6 mounting holes both on each front side and on the backside for exible installation • Operating time ≥ 10 h • Dimensions H×W×D: (170 × 75 × 35) mm • Weight: ~ 700 g Hand dynamometer K323 The high-performance unit with replaceable digital storage (SD memory chip) for recording of peak values and test series in csv le format (Excel™ compatible). Alternatively, continuous data (ASCII) transfer is possible via USB 2.0. Furthermore, force limits can be congured as switch-off criteria, optionally also stroke limits in connection with displacement signal, e.g. by TesT testing devices. Power is supplied by commercially available AA NiMH batteries. Scope of delivery Force transmission accessories: Compression piece, extension, hook (up to 1000 N) | CD with manuals | CD with virtual COM port driver (optionally visualization software W913) | 230V/50Hz charger with integrated charging electronics | 3 NiMH batteries | Certicate of factory calibration | Operating manual | Carrying case Available force measuring range 20, 50, 100, 200, 500, 1000, 2000, 5000 N Technical Data • Measurement uncertainty: ≤ ± 0.05 % • 32-bit RISC microprocessor • A / D converter: 24-bit • Measuring frequency: 50…2000 Hz • Backlit graphic LCD display: 7 digits + point • Data recording on integrated 2 GB SD Memory Card • Analogue output port 0...2 V DC (optional 2-point calibration) • 2 open collector output ports for controlling external devices • Optional connection of an incremental path signal (5 V TTL) • Die-cast aluminium housing RAL7035 with recessed grips with 2 M6 mounting holes both on each front side and on the backside for exible installation • Operating time ≥ 10 h • Dimensions H×W×D: (170 × 75 × 35) mm • Weight: ~ 820 g www.test-gmbh.com Subject to technical changes