Dynamometer – Model 323
2Pages

Dynamometer - Model 323 ■ Capacities: 20N to 5kN ■ Integrated force transducer ■ Measuring uncertainty: < ±0,05 % ■ Measuring frequency: 50Hz - 2kHz, selectable ■ 32bit RISC pProcessor ■ Recording of measured curves ■ Data export format .csv (compatible to Excel) The dynamometers of the model series 323 contain a high-resolution force sensor as well as processor-controlled electronic unit with most modern software. The main areas of application for these devices are quality assurance, incoming goods inspection, production and TesT research and development. Particularly operating forces as well as stability of components will be measured (springs, tracers, switches, levers, fasteners, etc.). The model 323 is used cross-sectorally e.g. in food industry, cosmetics, automotive, or medical technology. Measuring uncertainty Processor A/D converter Analogue force signal output Limit signals Display Indicator Resolution Power supply Operating time Measuring data acquisition Measuring frequency Data logging Data logging frequency Data export (USB) Illustration of real-time measuring values Dimensions (HxWxD) Weight Housing < ±0,05 % of nominal value 32bit RISC qProzessor, i28kB Flash 24bit 0...2V DC 2 digital Open Collector Outputs, programmable + 7-digit + decimal point + backlit, graphic, 2,8“ LCD display with 128x64 pixel ± 50.000 digits + 4 customary AA Ni-Mh accumulators + USB charging device + also usable with standard batteries + > 10 h without recharging + continuous indication of actual state of charge Measuring unit selectable (N, kg, lbs) 50...2000HZ, selectable + i28kB Flash memory + exchangable SD memory card (2GB) up to 2000Hz for real-time online data logging + Connection of the dynamometer for use as a streaming client for constant transfer of measuring values to a pc, (with up to 100 Hz) + Recorded values can be exported in csv. format via SoftTesT, possible under Windows XP/Vista, Windows 7 and 8 (170 x 75 x 35) mm 725 g to 850 g, depending on capacity Die-cast aluminum housing RAL7035 with recessed grips and 2 M6 mounting holes, both on each front side and on the backside, for flexible installation in load frames TesT Deutschland: Helena-Rubinstein-Stratee 4 | 40699 Erkrath | Fon: +49 211 2099030 | Fax: +49 211 209903201 | test@test-gmbh.com | www.test-gmbh.com TesT Schweiz: Bosch 63 | 6331 Hunenberg | Fon: +41 41 7856010 | Fax: +41 41 7856015 | test@test-ag.ch | www.test-ag.ch

Model 323 - Possible Options For analogue force signal output: For displacement or angular measurement: Software SoftTesT optional 2-point calibration connection of an incremental input for encoders for graphic illustration of real-time measuring values Modell 323 - Scope of delivery Dynamometer with Transportation case + User Manual + USB charging device + USB cable + SD memory card: 2 GB for 20N to 1kN: (below, left side) Tension hook + Connecting piece (WxL: 19 x 52mm) Elongation (L: 47mm) Round compression piece (L: 25mm ø 27mm) for 2kN and 5kN: (below, right side) Elongation (L: 68mm)...