Hydraulic winch designed for tower erection, for stringing operations of low and medium voltage overhead lines and for any lifting work. AMC402 with ALL112 Performance Max pull 30 kN Note: the basic machine performance is calculated at 20°C and at sea level Drum Specifications External diameter 530 mm Cooling system water Configuration Negative self-acting hydraulic brake Hydraulic dynamometer with set-point and automatic control of maximum pull Hydraulic oil cooling system Automatic level wind suitable for correct rope winding on the drum Rigid axle for towing at max speed of 30 km/h Towing shaft with adjustable height Mechanical front stabiliser Available Devices ALL112 Trailer for towing at max speed of 80 km/h with mechanical parking brake. Towing shaft with inertial braking system. Hook with 0 40 mm eye. Lighting system included EC type-approved for road circulation Hydraulic Transmission Closed hydraulic circuit for stepless speed variation in both rotating directions. ALL107 Capstan for lifting operations. Max pull 10 kN Certified Quality System |IS0 9001:2008| Keep you updated on: WWW.tesmeC.com Tesmec S.p.A. Headquarters Manufacturing facilities Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Ed. 2015/2016 PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE