Hydraulic Puller The machine is suitable to string one rope. The bull-wheel grooves are made of heat treated steel. Note: the basic machine performance is calculated at 20°C and at sea level Negative self-acting hydraulic brake Hydraulic dynamometer with set-point and automatic control of maximum pull On board reel winder with automatic level wind and special reel BOF370 for 500 m of Ø 8 mm rope Available Devices Max pull Speed at max pull Max speed Pull at max speed Bull-wheel diameter Max rope diameter Mass (without rope) Engine Gasoline Cooling system Electrical system Hydraulic Transmission Closed hydraulic circuit for stepless speed variation in both rotating directions. Pulling rope locking device when capstan is used (compulsory for EC market) Rigid axle and towing bar detachable, for manual towing Capstan (diameter=220 mm equipped with guide rope rollers) Swivel guide rope roller Trailer for towing at max speed of 80 km/h with mechanical parking brake. Towing shaft with inertial braking system. Hook with Ø 40 mm eye. Lighting system included EC type-approved for road circulation on demand Certified Quality System Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.4522445 Ed. 2015/2016 Manufacturing facilities Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375 Manufacturing facilities Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562 PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE