HOME & OFFICE Advanced Battery Management Auto Sensing Frequency DSP Control Technology PLUG & PLAY POWER FACTOR G E N E R A L S P E C I F I C AT I O N S • High frequency on-line double conversion technology • Quick and stable charging, 90% capacity restored in 3 h (standard model UPS) • Active power factor correction (APFC), input power factor up to 0.99 • Linear derating in low voltage input reducing battery discharging times • Output power factor 0.9 • Settable delayed start when power is restored • Wide input voltage range (110 V ~ 300 Vac) and frequency range (40 ~ 70 Hz) • Multiple functions settable via LCD: output voltage, EOD, auto-start, bypass • 50/60Hz frequency conversion • Cold start • Rear ventilation design and variable speed fan mode, ECO mode and frequency conversion mode • Multi-platform communications: RS232 (standard), USB / RS485 / SNMP / dry contacts (optional) • Effective software and hardware protection Av a i l a b l e O p t i o n s • Optional USB, RS485 card, AS400 dry contacts, SNMP card, SMS alarms, EPO function, and 12 A charger (2/3 kVA on

INPUT Rated voltage Voltage range 110 ~ 176 Vac (linear derating between 50% and 100% load); 176 ~ 280 Vac (no derating); 280 ~ 300 Vac (derating 50%) Power factor Bypass voltage range Total harmonic distortion (THDi) OUTPUT Voltage Voltage regulation 45 ~ 55 Hz or 55 ~ 65 Hz (synchronized range); 50 / 60 Hz ± 0.1 Hz (battery mode) Power factor Total harmonic distortion (THDv) ≤ 2% (linear load), ≤ 5% (non-linear load) Crest factor BATTERIES DC voltage Inbuilt battery Recharge time Standard model: 90% capacity restored in 3 hours; Long time model: depend on the capacity of battery SYSTEM ≥ 90%...