TEOS+ 100 6-10kVA
TEOS+ 100 6-10kVA
The TescomR TEOS+ 100 is an advanced UPS system featuring active power factor correction with an input power factor up to 0.99 and high efficiency of 95%, reaching up to 98% in ECO mode. It supports a wide input voltage range of 110 to 288 Vac and frequency range of 40 to 70 Hz, with auto-sensing for 50/60 Hz frequency. The system offers dual-input design for independent bypass and flexible battery configuration, supporting 16 to 20 batteries. It includes a digitally controlled charger with a maximum charging current of 12 A and intelligent battery management to extend battery life by 50%.
The TEOS+ models, Teos+ 106 and Teos+ 110, have capacities of 6 kVA/6000 W and 10 kVA/10000 W respectively. They feature single-phase three-wire input and output wiring, with rated voltages of 208/220/230/240 Vac. The system maintains a power factor of 1.0 and total harmonic distortion of ≤ 5% for input and ≤ 1% for output under linear load. It supports overload conditions and has a transfer time of 0 ms. The UPS is equipped with multiple communication interfaces including RS232, USB, and SNMP.
The system operates with a DC voltage of 192 Vdc, configurable between 192 to 240 Vdc, and supports 16 to 20 batteries. It offers a standard charging current of 1 A, with options for higher currents. The system efficiency is ≥ 94% at full load and up to 98% in ECO mode. It includes protections against short-circuit, overload, and other faults, and supports parallel connections up to four units.
The operating temperature range is 0°C to 40°C, with storage temperatures from −25°C to 55°C. It supports altitudes up to 1000 m, with derating for higher altitudes. The noise level is ≤ 55 dB at 1m. The dimensions and weight vary between standard and long-time models, with compact design for space efficiency.
Catalog excerpts
HOME & OFFICE Advanced Digital Parallel Technology Auto Sensing Frequency POWER FACTOR SERVICE / TECH. SUPPORT G E N E R A L S P E C I F I C AT I O N S • Active power factor correction (APFC), input power factor up to 0.99 • High efficiency 95% (up to 98% in ECO mode) • Advanced digital parallel technology • Wide input voltage range (110 ~ 288 Vac) and frequency range (40 ~ 70 Hz) • 50 / 60 Hz frequency auto sensing • Two modes of frequency conversion: 50 Hz input / 60 Hz output or 60 Hz input / 50 Hz output • Intelligent battery management, automatic floating / equalizing charge control, charger dormancy control, increasing battery life by 50% • Settable delayed start time when mains power is restored, reducing the impact on power grid or generator • Fan speed varies intelligently with temperature, reducing noise and extending its service life • Equipped with self-aging function • Dual-input design, supporting independent bypass • Compact internal layout, miniaturized the complete unit for small footprint • Flexible battery configuration (settable 16 - 20 pcs batteries) • LCD+LED display, multi-functional keys operation, friendly human-machine • Digitally controlled charger • High charging current available (Max. 12 A) • Powerful background software for parameters configuration • Charging voltage and current configured by demands • Advanced multi-platform communications: RS232, USB, RS485, SNMP and dry • Linear derating in low voltage input reducing battery discharging times, extending the service life of battery • Ability to switch on the UPS with batteries contacts communication interfaces • Effective software and hardware protection function, robust self-diagnostic function, and abundant event log for check Av a i l a b l e O p t i o n s • RS232 and smart card slot included • Optional parallel function, battery temperature compensation, SNMP card, USB, RS485 card, dry contac
Open the catalog to page 1
INPUT Input wiring Rated voltage Voltage range 110 ~ 176 Vac (linear derating between 50% and 100% load); 176 ~ 288 Vac (no derating) Rated frequency Frequency range Power factor Bypass voltage range Total harmonic distortion (THDi) OUTPUT Output wiring Rated voltage Voltage regulation Synchronized to bypass in mains mode; 50 / 60 Hz ± 0.1% Hz in battery mode Power factor 1.0 ≤ 1% (linear load); ≤ 4% (non-linear load) Total harmonic distortion (THDv) Crest factor Number of battery Inbuilt battery (standard model) Standard model: 1 A; Long time model: 5 A (default),1 ~ 5 A settable; 12 A (optional;...
Open the catalog to page 2All Tescom catalogs and technical brochures
XT1002 Pages
ACCESSORIES4 Pages
TEOS RT2 Pages
DS POWER H 300-400kVA2 Pages
TEOS 2002 Pages
XT2002 Pages
DS POWER H 10-100KVA2 Pages
TEOS 3002 Pages
DS POWER 300HT2 Pages
DS POWER X2 Pages
DS POWER XL2 Pages
DS POWER2 Pages
DS POWER SH2 Pages
DS POWER 3 LEVEL2 Pages
DS POWER HIGH SERIES2 Pages
DS POWER EFFICIENT SERIES2 Pages
DS POWER 110 SERIES2 Pages
XT3002 Pages
MTR MODULAR UPS2 Pages
MTI200 MODULAR UPS2 Pages
MTI300 MODULAR UPS2 Pages
STS 20002 Pages
STS 40002 Pages
STK 11001 SERIE2 Pages
TVR 11 SERIES2 Pages
TVR 33 SERIES2 Pages
TVR 33 SERIES2 Pages
Microprocessor Control2 Pages
SD SERIES2 Pages
TEOS 100 XL RT SERIES2 Pages
DS POWER 200SH2 Pages
DS POWER 300T SERIES2 Pages
TEOS+ 1002 Pages
TEOS1002 Pages
Leo2 Pages
TEOS100xl2 Pages
Leo+2 Pages
- Transformer
- Dry transformer
- IEC transformer
- Encapsulated transformer
- Single-phase transformer
- Touch screen HMI
- Industrial transformer
- Isolation transformer
- On-line UPS
- Three-phase transformer
- Ethernet converter
- Floor-standing transformer
- Frequency inverter
- LCD HMI terminal
- Compact converter
- Industrial UPS
- AC buffered power supply
- Single-phase UPS
- Serial converter
- Three-phase UPS