GENERAL SPECIFICATIONS • Internal isolation transformer at input • Full controlled conventional rectifier • Programable alarm relay contact outputs (4 standart, up to 16 relays as option) • Smart control and high reliability with DSP (Digital Signal Processor) • Possibility of monitor and control over RS232-RS485 • Float charge, equalizing charge and boost charge modes • Modbus communication • Automatic and manual charge modes • Earth leakage monitoring (DC leakage) • Low output voltage ripple and high reliability • Log records with date and time stamp up the 200 events • 2x16 character LCD display, showing measurements, status and alarm messages • Soſt start • Led displays for easy observation of rectifier status. • Audible alarm • Active parallel (current sharing) operation up to 4 devices • Programmable current limitation • Ability to monitor batteries and battery low alarm, even when the AC • Operation as voltage source or current source • Calibration of measurements from front panel input fails. • Battery temperature compensation • Language selection from front panel. (English / German / Turkish / • Easy observation via analog gauges • Battery test with adjustable voltage and duration Dutch / Portuguese) • Transducers for input / output voltage(s) / current(s) (4-20mA and 0-10V) • DC Low / High, Line failure, Over temperature, Short circuit protections • 12 pulse option to limit input current distortion • Ability to program all operation parameters (Password protected) • Input Power / kVA / kW measurement • Internal cabinet ligh

TECHNICAL SPECIFICATIONS MODEL INPUT Nominal voltage Input voltage tolerance Nominal frequency Transformer ITHD Input protection 190VAC / 200VAC / 380VAC / 400VAC / 415VAC (Faz - Faz) ± 15% 50Hz / 60Hz Galvanically isolated < 30-35% standard, <10% on 12pulse (Optional) Thermic Magnetic Overcurrent protection MCB, Overvoltage protection) OUTPUT Output voltage Output voltage adjustment 120% of Nominal Output Voltage Output current adjustment 10% - 100% of Nominal Output Current Battery charging current adjustment 10% - 100% of Nominal Output Current Boost charger voltage 100% - 120% of Floating...