Catalogs >
Tescom >
DS POWER EFFICIENT SERIES

DS POWER EFFICIENT SERIES
2Pages

Catalog excerpts

DS POWER EFFICIENT SERIES 3 phase in / 3 phase out UNINTERRUPTIBLE POWER SUPPLIES GENERAL SPECIFICATIONS HE-High Eﬀiciency Zero impact source DS Power Eﬀicient Series is available from 100 to 800 DS Power Eﬀicient has a zero impact on connected kVA. The UPS feature a new on-line double-conversion power sources - grid networks or generators: technology utilising IGBT and DSP (Digital Signal • ≤ 3% input current distortion • Input power factor 0,99 Processor) control to provide maximum protection, • power walk-in function - to ensure a progressive power quality and green energy for any type of rectifier start-up application including primary datacenters, disaster recover sites, telecoms rooms, industrial processes and • start-up delay function - to restart the rectifier when the mains power supply is restored. security applications. High eﬀiciency stands for higher Smart Grid Ready UPS active power available if compared with legacy UPS DS Power Eﬀicient series UPS are ‘Smart Grid Ready’ thanks to output unitary p.f. Nominal power is granted and can be used within an energy storage solution, with no downgrading indipendently from operating whilst simultaneously operating at the highest levels of eﬀiciency and automatically selecting the most eﬀicient operating mode based on the state of the lower grid network or generator supply. The UPS are designed to electronically interface with energy management systems within an ‘intelligent’ Smart Grid application. Advanced supervision DS Power Eﬀicient series UPS have a front panel graphic display providing UPS information, measurements, status updates and alarms in diﬀerent languages, with wave form displays including voltage/current and provide a kWh reading that can be used to measure IT loads and calculate a datacenter PUE (power usage eﬀectiveness) ratio. Battery care system DS Power Eﬀicient series UPS include a range of features designed to prolong battery life and reduce their usage. Output isolation transformer • Better load protection from DC/Battery problems • The UPS can be supplied from 2 independent lines • Fault on DC bus will not aﬀect the by-pass availability • High Short circuit current • Higher immunity to ha

Open the catalog to page 1

TECHNICAL SPECIFICATIONS MODEL Capacity (kVA) INPUT Nominal voltage Power factor Frequency tolerance ± 2% (selectable from ± 1% to ± 5% from front panel) OUTPUT Nominal power (kVA) Nominal voltage Voltage tolerance < 1% with linear load / < 3% with non-linear load Crest factor Frequency stability on batt Overload capacity BATTERY Type VRLA AGM / GEL; NiCd; Supercaps; Li-ion; Flywheels Battery number Ripple current Charge voltage compensation GENERAL Net weight (kg) Dimensions (mm) WxDxH Remote signals volt-free contacts (configurable) Remote control Double RS232 + remote contacts + 2 slots...

Open the catalog to page 2