1. Catalogs
  2. Tescom
  3. DS POWER 200SH
video corpo

DS POWER 200SH

DS POWER 200SH

DS POWER 200SH

Product catalog summary
General Overview: The TescomR DS Power 200SH UPS is designed to be a cost-effective solution with a smaller footprint, utilizing a 3-level transformerless topology. It features high efficiency up to 94%, low input current total harmonic distortion (THD), and a high input power factor. The UPS is equipped with advanced DSP technology for enhanced performance and reliability.
Specifications: The UPS models DS210SH, DS215SH, and DS220SH offer power capacities of 10, 15, and 20 kVA respectively. Input voltage is 380/400 VAC with a frequency of 50/60Hz. The output power factor is 0.9, with voltage distortion ≤ 10% and efficiency up to 94%. The UPS supports a crest factor of 3:1 and provides overload protection.
Batteries: The UPS supports VRLA AGM, GEL, or NiCd batteries with an external battery cabinet. It includes features like automatic battery testing every 72 hours, temperature compensation, and advanced battery protection.
Standards and Compliance: The UPS is manufactured under CE, ISO9001, ISO14001, TSE, and GOST international standards. It includes a 2-year warranty.
Technical Features: The UPS includes a static and maintenance bypass switch, output short circuit and overload protection, and an external REPO switch input. It also features advanced diagnostics, selectable input/output voltage/frequency range, and output DC leakage protection.
Communication and Control: The UPS is equipped with an RS232 serial port, dry contact outputs, and optional SNMP and MODBUS adaptors. It supports advanced remote control features and includes T-Mon UPS Management Software for monitoring.
Environmental and Physical Characteristics: The operating temperature range is 0°C to 40°C, with a protection degree of IP20 and a maximum relative humidity of 90% (non-condensing). The UPS is designed to operate at altitudes below 1000m above sea level with acoustic noise levels below 57 dBA.
Options: Optional adaptors include SNMP, MODBUS, and RS485, with software options for multi-UPS monitoring.
See more

Catalog excerpts

DS POWER 200SH-1

DATA CENTER MALLS & FACILITIES DS POWER 200SH 10-20kVA 3-Level Technology IGBT Rectifier DSP Control SERVICE / TECH. SUPPORT POWER FACTOR DS Power 200SH UPS appear as a cost effective and smaller footprint UPS. Using the 3 level topology and control system, this series UPS have the latest DSP technology to be programmed to suit a wide variety of electrical environments without impending its performance. Efficiency, reliability and functionality are enhanced to levels unattainable with the old analogue technology. This technology does not only create significant increase in MTBF, but the capability of DSP to accurately manipulate signals at very high speed permits all the UPS subsystems to be controlled with greatly increased precision. • 3 DSP controlled modular structure • Optional SNMP and MODBUS adaptors • Full digital structure • Low input current total harmonic distortion (THD) • Fewer electronic components • High input power factor • Output current limiting • Advanced diagnostics for the input • Cold start function • Selectable input/output voltage/frequency range • Static and maintenance by-pass switch • Output DC leakage protection • Output short circuit and overload protection • Seperate DSP for PFC 3 level battery protection • External REPO switch input • Charge / discharge current indicator • 192 events memory (192 events 14.400 alarms) • Advanced remote control features • Clock and calender (battery supported) • Manufactured under CE,ISO9001,ISO14001,TSE and GOST • Automatic battery test ,remaining battery time indicator international standards • Temperature compensated charge system (optional)

 Open the catalog to page 1
DS POWER 200SH-2

INPUT Voltage Power factor ≤ 7% (depends on mains input conditions) By-pass voltage Voltage distortion Fuses, Voltage & Frequency Tolerance Power factor Frequency tolerance Line synchronized: ± 2% / Free running: ± 0.1% Crest factor Overload protection 100% - 125% load: 10 min, 125% - 150% load: 1 min, - > 150% load: by pass Fuses,Advanced short circuit, Voltage tolerance, DC balance, Regenerative load, Current limiting BATTERIES Type Float charging voltage Battery cabinet External (attached cabinet at the bottom of UPS) Battery ambient temperature Battery protection 3 level alarms, Battery fuses,...

 Open the catalog to page 2

All Tescom catalogs and technical brochures

  1. XT100

    2  Pages

  2. ACCESSORIES

    4  Pages

  3. TEOS RT

    2  Pages

  4. TEOS 200

    2  Pages

  5. XT200

    2  Pages

  6. TEOS 300

    2  Pages

  7. DS POWER X

    2  Pages

  8. DS POWER XL

    2  Pages

  9. DS POWER

    2  Pages

  10. DS POWER SH

    2  Pages

  11. XT300

    2  Pages

  12. STS 2000

    2  Pages

  13. STS 4000

    2  Pages

  14. TVR 11 SERIES

    2  Pages

  15. TVR 33 SERIES

    2  Pages

  16. TVR 33 SERIES

    2  Pages

  17. SD SERIES

    2  Pages

  18. TEOS+ 100

    2  Pages

  19. TEOS100

    2  Pages

  20. Leo

    2  Pages

  21. TEOS100xl

    2  Pages

  22. Leo+

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.