UHF Scanner RE40 RFID UHF reader and writer Interfaces: Bluetooth® 5.1, USB Bluetooth® profiles: keyboard emulation and serial emulation Automatic reading of EPC and/or TID Data format HEX, ASCII or SGTIN-96 string with optional prefix/suffix UHF Scanner RE40 is a powerful RFID reader, capable of reading UHF tags and transmitting the acquired data to any device equipped with a Bluetooth interface, including Android or iOS smartphones and tablets. Taking advantage of the integrated linear polarization antenna, the maximum reading distance is around 4 meters depending on the FF-type UHF tags used. Since it is a loop antenna, the reading of miniaturized NFtype UHF tags is also facilitated. As an alternative to the integrated antenna, to achieve greater reading distances or to be used in special applications, it is possible to connect one external antenna to the UHF Desktop RE40 via an optional SMA connector. The use of the reader is easy and intuitive, thanks to the presence of a single button to activate the reading of UHF tags, combined with a multicolored RGB LED, a multitone beeper and a haptic actuator (vibration) that informs the operator about the result of the reading. UHF Scanner RE40 integrates Bluetooth 5.1 radio transmission technology. There are two profiles available: keyboard emulation and serial emulation. In keyboard emulation, the reader is able to transmit the data read by the UHF tags to any pre-existing application, in any keyboard data input field. In serial emulation, through specially developed applications, the reader is able to perform any reading or writing operation on UHF tags (TT-RFID protocol or API for Android or iOS are available to developers). UHF Scanner RE40, during its normal use, works on battery power. Charging takes place via a USB Type C connector, making the reader compatible with all latest generation battery chargers. Thanks to its exclusive 3.5mm jack input, the same as that of smartphones, it is possible to connect the reader to a common selfie stick, so as to make reading UHF tags ergonomic even in difficult or uncomfortable positions to reach with the reader held in hand.

UHF Scanner RE40 MAN/MACHINE INTERFACE 1 button for the RFID scan activation and for switch the device on/off 1 RGB multicolor LED (right), 1 multitone beeper, 1 haptic actuator (vibration), to report the result of the RFID scan 1 RGB multicolor LED (left) to report the operating status of the reader RFID ENGINE ZEBRA RE40 RFID UHF module Air Interface Protocol: EPC Global UHF Class1 Gen2 / ISO 18000-63 Operating Frequency: 865- 928 MHz band for worldwide support Regulatory and Compliance: EMI/RFI EN 55032:2012 / AC:2013 (Class B) EN 5032:2015 / AC:2016 (ClassB) EN 55024:2010 EN 5024:2010 / A1:2015...