BLUEBERRY LE UHF MS14
2Pages

{{requestButtons}}

Catalog excerpts

BLUEBERRY LE UHF MS14 - 1

BLUEBERRY LE UHF MS14 RFID reader and writer USB interface - Bluetooth Low Energy 4.1 Bidirectional serial emulation profile Automatic reading of EPC or EPC + TID or other combinations Output ASCII / HEX with prefix and suffix Battery life up to 10000 readings Ring of the loop antenna is 14 mm and it’s suitable for small or micro tag (such as Murata Magicstrap®) embedded or molded on plastic Antenna shape has the viewfinder function Max reading distance is 5/6 mm BlueBerry LE UHF MS14 is a mobile mini RFID reader, shaped like a keychain, able to read UHF tags and transmitting the acquired data to any device equipped with Bluetooth® Low Energy radio interface. The maximum reading distance is 5/6 mm. The use of the RFID reader is easy and intuitive, thanks to the presence of a single button to activate the reading of the UHF tags, combined with an LED and a multi-tone beeper to alert, the operator of the reading. BlueBerry LE UHF MS14 integrates Bluetooth® Low Energy radio technology, specifically it uses the serial emulation profile, a two-way channel. A simple serial communication protocol, available on all TERTIUM Technology products, allows the user to manage all the RFID reader functions, in particular, the ID scan and the reading/writing of the UHF tag memory. With this profile it is possible, in the development phase, to integrate RFID technology in any application or program for mobile devices with an iOS and Android operating system. BlueBerry LE UHF MS14 is battery powered and charging is carried out via a micro USB connector. Through the USB port it is possible to connect the BlueBerry LE UHF MS14 to a pc, so that it can also be used as a normal RFID desktop reader. Data transmission on the USB interface takes place in virtual serial mode, a bidirectional channel (managed through the same serial communication protocol as the Bluetooth® Low Energy interfac

Open the catalog to page 1
BLUEBERRY LE UHF MS14 - 2

MAN/MACHINE INTERFACE 1 function key for RFID read activation, Multitone Beeper, 2 LED for device operation signaling INTERNAL DEVICES Frequency: 13.56 MHz Power: 200 mW Standard: ISO 15693, ISO 14443-A (only reading) Read range: 5/6 mm Ring of the loop antenna is 14 mm Micro USB type B, Bluetooth® Low Energy iOS, Android, RIM, Windows Mobile/Phone, Windows, macOS, Linux Texas Instruments MSP430 (16 bit RISC a 16MHz) POWER SUPPLY USB powered: 230mA peak @ 5Vdc (RF active full power), 30mA @ 5Vdc (idle mode) Battery powered: Li-Poly Battery 3.7Vdc 300mAh, rechargeable via micro USB Battery...

Open the catalog to page 2

All TERTIUM Technology catalogs and technical brochures

  1. Geko

    2 Pages

  2. GasLoggger

    2 Pages

  3. GreenSensing

    2 Pages

  4. BlueRFID HF

    2 Pages

  5. IceKey UHF

    2 Pages

  6. BlueRFID UHF

    2 Pages

  7. IceKey HF

    2 Pages