MAC 25-4
8Pages

{{requestButtons}}

Catalog excerpts

MAC 25-4 - 1

TECHNICAL DATASHEET RANNA ATEREX BRAND MAXIMUM CAPACITY MAXIMUM BOOM LENGTH MAXIMUM HOOK HEIGHT

Open the catalog to page 1
MAC 25-4 - 2

OVERVIEW The MAC 25-4 is a mobile articulated crane with a maximum lifting capacity of 25 tonne (27 USt). The MAC 25-4 offers maximum safety, excellent roadability, intuitive operation and unmatched versatility. Over the years it’s design has been tried, tested and proven in a range of difficult lifting applications and is still a customer favourite today. A superlift (SL) upgrade is also available on the MAC 25-4 as an additional option. The SL kit works in tandem with the existing MAC 25 counterweight, adding a low slung additional counterweight piece to the rear of the machine,...

Open the catalog to page 2
MAC 25-4 - 3

Ilf/ Maximum boom length 18.4m Maximum hook height 18m Boom elevation angle range -10° / 65° Maximum hook height with jib 20.5m Machinery hook 15 tonne Axial piston pump 62cc/rev Maximum pump flow rate 130 Iitre/min Maximum working pressure 250 bar Hydraulic tank capacity 380 litre Maximum line pull 4.2 tonne Hook block (6 part)25 tonne maximum rated capacity Front Axle Rear Axle Axle total Turning circle Standard engine Engine power Engine torque Fuel Type Fuel Capacity Transmission Transfer case Mercedes OM 906 205kW 1100 Nm Diesel 440 litre Allison 6 speed ZF 2:1 Ratio Brake System Air...

Open the catalog to page 3
MAC 25-4 - 4

DIMENSIONS / AREA OF OPERATION Plan view 7155 mm Right hand view 4640 mm (TO CENTRE OF STEERING WHEEL)

Open the catalog to page 4
MAC 25-4 - 5

RADIUS LOAD CHART Hook will not reach ground when boom head is in the region if the hook block is reeved on 6 parts Fly jib extended 21. 4m Rated Capacity (RC) at 0° articulation NOTE: Rated Capacity values shown are for the Pick and Carry Chart.

Open the catalog to page 5
MAC 25-4 - 6

RATED CAPACITY CHART - FALL BLOCK RAD WINCH RATED CAPACITY SINGLE PART TWO PARTS FOUR PARTS SIX PARTS UNITS: - ANGLES IN DEGREES - LENGTHS IN METRES - LOAD IN KILOGRAMS BOOM ANGLE RADIUS AT ZERO BOOM ANGLE ROLL ROLL ROLL Pitch & Roll angles indicated are representative of lifts based on firm level ground with tyres at specified pressures.

Open the catalog to page 6
MAC 25-4 - 8

B? BRISBANE j9r SYDNEY MELBOURNE Brisbane (Head Office) Terex Australia Pty Ltd 585 Curtin Avenue East (PO Box 1396) Eagle Farm QLD 4009, Australia Tel: +61 7 3868 9600 Fax: +61 7 3268 2489 Sydney Terex Australia Pty Ltd 114 Hassall Street Wetherill Park NSW 2164, Australia Tel: +61 2 8786 4444 Fax: +61 2 8786 4455 Services: Manufacturing, Sales, Service, Parts Services: Sales, Service, Parts Melbourne Terex Australia Pty Ltd 133 Logis Boulevard Dandenong South VIC 3175, Australia Tel: +61 3 8794 4170 Fax: +61 3 9551 8143 Services: Sales, Service, Parts Perth Terex Australia Pty Ltd 39...

Open the catalog to page 8

All TEREX CRANES catalogs and technical brochures

  1. TRT70US

    32 Pages

  2. TRT40US

    8 Pages

  3. TRT 65

    6 Pages

  4. CSE 40

    8 Pages

  5. CSE 36

    8 Pages

  6. CSE 30

    8 Pages

  7. TRT 90

    36 Pages

  8. TRT 80

    44 Pages

  9. TRT 100US

    6 Pages

  10. CTT 182-8

    16 Pages

  11. CBR 28 PLUS

    6 Pages

  12. Ctt 172-8

    24 Pages

  13. AT22

    7 Pages

  14. RT 100US

    24 Pages

  15. CTT 132-6

    16 Pages

  16. FC 6.24H

    8 Pages

  17. RT 100

    22 Pages

  18. RT 90

    24 Pages

  19. RT 1080L

    24 Pages

  20. AT 40

    8 Pages

  21. AT 15-3

    22 Pages

  22. RT 1080

    20 Pages

  23. RT 1070

    24 Pages

  24. RT 1045L

    28 Pages

  25. RT 1045

    24 Pages

  26. RT 35-1

    24 Pages

  27. Boom trucks

    16 Pages

  28. AC 700

    62 Pages

  29. AC 500-2

    62 Pages

  30. AC 250-1

    40 Pages

  31. Explorer 5600

    42 Pages

  32. Explorer 5500

    42 Pages

  33. AC 40-2L

    32 Pages

  34. RS 70100

    12 Pages

  35. BT 3870

    16 Pages

  36. CROSSOVER 8000

    28 Pages

  37. CROSSOVER 6000

    20 Pages

  38. CROSSOVER 5000

    20 Pages

  39. TC 2800-1

    70 Pages

  40. AC 40 City

    26 Pages

  41. CD 225

    22 Pages

  42. MAC 25-3

    16 Pages

  43. AT 20-3

    16 Pages

  44. AT-15-3

    16 Pages

  45. Truck cranes

    16 Pages

Archived catalogs