TSV200-60i
2Pages

TERACOMShort description TSV200-60i is a voltage sensor with a 1-Wire digital interface and galvanic isolated input. It provides a low-cost option for DC voltage monitoring. The sensor can be used for power measurements of telecommunication systems (-48VDC standard), solar systems, monitoring and control of batteries, industrial automation etc. TSV200-60i has two RJ11 connectors, for easy daisy chain arranging of the 1-Wire bus. Supply voltage range (1-Wire bus) Maximum supply current (1-Wire bus) Input DC voltage range Resolution Accuracy Isolation voltage Operating temperature range Operating relative humidity range Dimensions Can be used with following TERACOM controllers: - TCW241 - TCW220

TSV200-60i - 1-Wire voltage sensorPinout Pin Description Corresponding UTP wires color White/Brown White/Green Green White/Orange Orange Brown The status of the device is shown by single LED, located on the front panel: • If the LED blinks on a period of 1 second, the sensor works properly; • If the LED blinks on a period of 3 seconds, there isn't communication with the controller; • If LED doesn't blink, there isn't power supply. It is strongly recommended to use only UTP/FTP cables. It is strongly recommended to use daisy-chained (linear) topology for multiple sensors and keep total cable...