TSC200-15

Product catalog summary

Short Description:
TSC200-15 is a galvanic isolated current sensor with a 1-Wire digital interface, designed for cost-effective AC or DC current monitoring. It is suitable for applications in building management systems, battery monitoring, solar systems, and industrial automation. The sensor features two RJ11 connectors for easy daisy chain arrangement on the 1-Wire bus.

Technical Specifications:

Supply Voltage Range: 4.0 to 5.5 V (1-Wire bus)
Maximum Supply Current: 15 mA (1-Wire bus)
Input AC Current Range: 0.3 to 15 A
Input DC Current Range: ± (0.3 to 15) A
Accuracy: ± (2% + 0.2 A) from -20 to +25°C; ± (2% + 0.1 A) from +25 to +55°C
Resolution: 0.1 A
Isolation Voltage: 3000 Vrms
Maximum Working Voltage for Basic Isolation: 277 VAC
AC Frequency: 48 to 65 Hz
Operating Temperature Range: -20 to +55 °C
Operating Relative Humidity Range: 5 to 85 %RH (non-condensing)
Dimensions: 85 x 35.1 x 23.5 mm

Usage:
The sensor is compatible with TERACOM controllers such as TCW241, TCW220, and TCW240B. It is recommended to use UTP/FTP cables with a maximum length of 30 m and a daisy-chained (linear topology) configuration for multiple sensors.

Sensor Connection:
The 1-Wire bus is a registered trademark of Maxim Integrated Products, Inc. Users are advised to consult Maxim's 1-Wire tips for optimal performance. The sensor's status is indicated by an LED on the front panel, with different blink patterns indicating operational status, communication issues, or power supply absence.

AC/DC Mode:
The TSC200-15 can measure either AC or DC current, with the mode selectable via a jumper on the PCB. The mode should be set before connecting the sensor to the 1-Wire bus.

Pinout:

Pin 1: 1-Wire GND (White/Brown)
Pin 2: 1-Wire GND (White/Green)
Pin 3: 1-Wire Data (Green)
Pin 4: 1-Wire GND (White/Orange)
Pin 5: 1-Wire +VDD (Orange)
Pin 6: 1-Wire +VDD (Brown)

Catalog excerpts

TERACOMShort description TSC200-15 is a galvanic isolated current sensor with a 1-Wire digital interface. It provides a low-cost option for AC or DC current monitoring. The sensor can be used for current and power measurements for building's management systems, monitoring, and control of batteries, solar systems, industrial automation etc. TSC200-15 has two RJ11 connectors, for easy daisy chain arranging of the 1-Wire bus. Supply voltage range (1-Wire bus) Maximum supply current (1-Wire bus) Input AC current range Input DC current range Accuracy (-20 to +25°C) Accuracy (+25 to +55°C) Resolution Isolation voltage Maximum working voltage for basic isolation AC frequency Operating temperature range Operating relative humidity range Dimensions Can be used with following TERACOM controllers - TCW241 - TCW220 - TCW240B

Open the catalog to page 1

control solutions TERACOM TSC200-15 - 1-Wire current sensor Pin Description Corresponding UTP wires color LED indicator The status of the device is shown by single LED, located on the front panel: • If the LED blinks on a period of 1 second, the sensor works properly; • If the LED blinks on a period of 3 seconds, there isn't communication with the controller; • If LED doesn't blink, there isn't power supply. AC/DC mode TSC200-15 can be used for AC or DC current measurement. The working mode can be changed by a jumper on PCB. When the jumper is open, the sensor measures DC current. The mode of...

Open the catalog to page 2

TSC200-15

TSC200-15

Catalog excerpts

All Teracom catalogs and technical brochures